I was wondering if it was possible to answer a question regarding a component on a previous Avnet product that is now obsolete. In particular, I am looking at the MicroZed I/O Carrier Card (MBCC). I noticed that from the DataSheet, there are specifications for the behavior of the VCCIO_EN and PWR_EN signals, which are controlled by the MAX16025 chip. However, I noticed that the corresponding BOM labels this as DNP, and the physical board is also missing this particular component. I was curious about the exact purpose and placement of this component. It had seemed as if it was necessary to enable the VCCIO_34 and VCCIO_35 power supplies to the rest of the carrier board, so I am confused why it is not physically present and was marked as DNP. Was the MBCC changed to allow for only separated power of the carrier and the MicroZed FPGA?