Hi,
I was having trouble using the FMC header board for the AUBoard-15P development kit. I am not seeing anything connected to the header pins (LA00-LA33). I checked the voltage on the PG6 input of the SLG7AV46723 power sequencer (Figure 34 in the hardware user guide), and I'm reading ~0V where it should be ~3.3V. I am assuming there is an issue with the voltage regulator associated with Bank 66_86 and would like to probe it to verify, but cannot find it in either the hardware user guide or schematics.
What is the part number and schematic location for the voltage regulator that provides the +VCCO_66_86 for those banks?
Best,
Jason