ABB CONTROL - DL40055S99 - STARTER, DOL, 5.5KW, 400V

ABB CONTROL - DL40055S99DL40055S99 - STARTER, DOL, 5.5KW, 400V | Buy Now!Buy Now!

DOL Starter

Metal Enclosure to IP55

IEC947-4-1 Issue 1

Installation Instructions

Product Installation

Remove cover by releasing 4 corner screws with a screwdriver.

Wiring to overload:

Connect leads provided from – terminal 14 to terminal 95 and terminal A2 to terminal 96

Check operating coil voltage and frequency

Remove appropriate top/bottom conduit knockouts.

Mount base on a vertical surface using 4 off fixing points. To ensure environmental protection cover screws internally with supplied caps.

Connect conduit bushes

Connect cables and ensure that all terminals are tight. Refer

When installed, set the hand/auto rest selector and adjust the current calibration to the desired value.

Replace cover and re-tighten cover screws.