Ever need an extra incentive to get good grades in school? Adam builds a celebration robot that creates chaos when he receives a good grade. He incorporates the Canvas API to further automate the project. Watch Adam build this wacky robot (including a confetti popper and an inflatable dancer).
Watch the Video:
Bonus Content:
Bill of Material:
| Product Name | Manufacturer | Quantity | Buy Kit |
|---|---|---|---|
| Arduino MKR Zero | Arduino | 1 | Buy Now |
| LM386 Audio Amplifier | TEXAS INSTRUMENTS | 1 | Buy Now |
| 2W Speaker | MULTICOMP PRO | 1 | Buy Now |
| PCB | VECTOR ELECTRONICS | 1 | Buy Now |
| 10K Ohm Poteniometer | Bourns | 1 | Buy Now |
| 3D PRINTING FILAMENT, PLA, 1.75MM, WHITE | ULTRAFUSE | 1 | Buy Now |
| Bipolar (BJT) Single Transistor, NPN, 45 V | STMICROELECTRONICS | 1 | Buy Now |
| 10uF 25V Capacitor | TDK | 2 | Buy Now |
| Servo Motor | DFROBOT | 1 | Buy Now |
| 270 uF 35 V Capacitor | PANASONIC | 1 | Buy Now |
| 0.1 uF 50 V Capacitor | VISHAY | 1 | Buy Now |
| 10 Ohm Resistor | VISHAY | 1 | Buy Now |
Additional Parts:
| Adafruit Breakout Board (for the SMD audio amp) |
| Wacky Waving Inflatable |
| MicroSD Card |
