Experimenting with Magnetic Components: The Challengers

Project: Smart Coin Sorter

Synopsis: Experiment and build an oscillator for use in a smart coin sorter and see the possibility of using any of the coils as the transmitter coil, study what possible filters can attenuate noise.

Enrique Albertos's project blogs

Project: Test Gan Quick Mobile Charger Different CMC

Synopsis: Experiment with different common mode chokes in a GaN Mobile charger with 65W output.

F. Yao's project blogs

Project: Chokes in the Lab

Synopsis: Experiment with inductors as LAB project building block, including uses, applications and measurement

Jan Cumps's project blogs

Project: Experimenting with Magnetic Components

Synopsis: I am interested to experiment the challenge kit in using for the practical testing laboratory to design the suitable circuits and to study their I-V characteristics.

karthickiot's project blogs

Project: Filtering Output Noise 5volt Mobile Charger

Synopsis: Using a spare old phone charger with high output noise, I want to build a circuit that can filter this noise.

manojroy's project blogs

Project: Go Discrete: Go Power

Synopsis: Use the kit's radial inductor parts for designing the buck-convertor stage and experiment with common mode chokes.

navadeepganeshu's project blogs

Project: Ideal vs Real Inductors

Synopsis: Experiment and compare an ideal inductor with no parasitics, perfect linear impedance vs frequency plot, no SRF, no DCR vs a real/practical/non-ideal model of inductor. I will also talk about the importance of SRF and Q-factor and how a single inductor can behave as a tank circuit at higher frequencies thereby severely affecting the performance of the circuits.

rsjawale24's project blogs

Project: Experimenting with Magnetic Components

Synopsis: Experiment with a line filter to check for possible scope of frequency signal entering into input power. I will also experiment with various kit inductors to find the quantity of fluctuation reduction when a fluctuating current flows and storing electric energy as magnetic energy. I would like to experiment with Pulse Transformers to turn ON and OFF using a switch at an operating frequency and a pulse duration that delivers the required amount of power.

Swathi C's project blogs

Project: Multi-Inductor Interleaved Boost Converter

Synopsis: Experiment with an Interleaved boost converter that is suited for high power application due to lower ripple content in current. I will investigate the performance variation of IBC with the change of inductor value because inductance has a big impact on input current ripple and output voltage ripple.

Taifur's project blogs

Project: Power Supply Noise Rejection Filters for Sensitive Devices

Synopsis: I'll use this Magnetic components kit to create multiple power supply topologies.

vinayyn's project blogs