Hello everyone. About three weeks ago I received prize for my three blogs as part of Experimenting with Thermistors. I was busy so I write about it now. I originally plan to post more blogs as part of competition, but I wrongly estimated time complexity and decided to rather spend my free time with other competitions. As part of Experimenting with Thermistors I posted following three blogs:
- Blog #1: Introductory Blog to My Thermistor Experiments
- Blog #2: Thermistors Minitutorial Part 1 - Measuring temperature using thermistor and multimeter
- Blog #3: Thermistors Minitutorial Part 2 - Measuring Temperature Using Thermistor and Arduino
Because number of written blogs (three) is more than required (two) for finisher prize, I received it.
Duratool 129 pcs Tool Set
For my three blogs I received 129 pcs tool set with box.
Contents
Datasheet lists content of the box as follows:
And here it is:
Kit is very comprehensive. I did not find anything missing in this kit for any general-purpose work. It is nice kit.
As far, I have used several tools. Quality is very high, and I am satisfied with it.
Last words
At the end I would like to thank Element14 for sending me this reward. It was nice time spend with thermistors and this finisher prize is also very nice. Both things I received for free. I also gained lot of experiences even I terminated my journey with thermistors soon. I consider these experiences more valuable than the reward. They are not experiences with just only thermistors, but most experiences which I gained apply to all resistive sensors in general. I also learnt from blogs of other challengers a lot.
