Internet of the Backyard

Forum Have a question for TI re: The Internet of the Backyard Challenge? Ask here!

Actions

Forum Thread Details

Replies 39 replies
Subscribers 8 subscribers
Views 4125 views
Users 0 members are here

Related

Have a question for TI re: The Internet of the Backyard Challenge? Ask here!

doctorcdf over 11 years ago

This thread is dedicated to questions for the Internet of the Backyard challenge; Texas Instruments' staff will be monitoring it regularly.

Thanks!

Top Replies

Robert Peter Oakes over 11 years ago in reply to BigG +1

It looks like the is a FET switch configured to protect against reverse voltage and should also protect the batteries from harm if the USB or other supply is also connected (Q2 bottom right)
bwelsby over 11 years ago in reply to DAB +1

DAB wrote: What is the APP needed to open the CCS 6 download? I got the same message on Windows 8.1 and 7. The TI message indicated that they were .exe files, but when I tried to change the name…
janisalnis over 11 years ago in reply to Former Member +1

Registering at Plotly is free of charge for everyone. Limitation, I read somewhere, is that it would allow to store 50 plots. Is there an simple HTTP POST example for CC3200? There is a GET function used…

Parents

janisalnis over 11 years ago

Hi, TI!

I got stuck with a problem permanently storing programm on LAUNCHXL.

I can build the project, debug it. Wi-Fi connect LED blinks and in serial console I can see text coming.

When I run Uniflash and select oob.bin file to upload, it is uploaded. There are some other files that are present /sys/macadd.bin But after I reset the board and remove SOP2 jumper the board does not seem to run (no LED is blinking)

Janis.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
Robert Peter Oakes over 11 years ago in reply to janisalnis

you can upload directly to the launchpad from CCS, does it work this way ?
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel

Reply

Robert Peter Oakes over 11 years ago in reply to janisalnis

you can upload directly to the launchpad from CCS, does it work this way ?
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel

Children

janisalnis over 11 years ago in reply to Robert Peter Oakes

I have not found how to upload programm permanently from the CCS. It remains only untill a reset.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
Former Member over 11 years ago in reply to janisalnis

Hi Janis,
it is correct, CCS can only upload the binary to the SRAM. But for real application, you need to flash the binary to the external flash on the Launchpad using the UniFlash. Later during boot, this image will be again copied by the bootloader to the SRAM to be executed.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel