Download Resource Files from Github:
https://github.com/uElectron/minizedSDK
======================================================================
In this Video , using the Minized Board based on Xilinx Zynq :
1.)We review about the First Stage Bootloader and its requirement.
2.)We then Generate a Boot Image for QSPI using Bootloader,Bit Stream and Led Blinking Application using Boot Gen provided in SDK.
3.)We then Flash the Boot Image Onto the Minized QSPI Board .
4.)We then set the Boot Switch to "F" (Flash) side instead of "J" (JTAG)side and connect the Board to the Power Socket using Auxilary Power Port.
"Bingo ! We Got Off the Shelf Led Blinking Program on our Board."
This video is Based on my Previous Lectures of "Software Application Development for Minized Board on Xilinx SDK" playlist :