I am looking for drill files of mkr wifi 1010

I am I am looking for drill files of mkr wifi 1010. where can I find it with distance between holes. I need to make hat for it for completing my project.

Top Replies

shabaz 23 days ago in reply to manojroy123 +3

Pitch is obviously 0.1" otherwise how could it fit a breadboard? Distance between the two rows can be measured with any ruler (or drop it onto a breadboard or any prototyping board if you have one nearby…

Parents

shabaz 23 days ago

There's a dimensioned drawing if you scroll down this page:

https://antonio2709839759912.wordpress.com/2021/11/29/arduino-mkr-wifi-1010/

I don't think Arduino supply this in any machine format. I think even the dimensioned drawings are user-created with calipers (at least, that's how I had to do it with a different Arduino board quite a few years ago).
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
manojroy123 23 days ago in reply to shabaz

Still not enough. I looking for "pitch" for connector refers to the center-to-center distance between adjacent pins or contacts in the same row. Common pitches include 2.54mm (0.1 inch) and 1.27mm (0.05 inch), but others exist.

I am also looking for distance between two connector.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel

Reply

manojroy123 23 days ago in reply to shabaz

Still not enough. I looking for "pitch" for connector refers to the center-to-center distance between adjacent pins or contacts in the same row. Common pitches include 2.54mm (0.1 inch) and 1.27mm (0.05 inch), but others exist.

I am also looking for distance between two connector.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel

Children

shabaz 23 days ago in reply to manojroy123

Pitch is obviously 0.1" otherwise how could it fit a breadboard?

Distance between the two rows can be measured with any ruler (or drop it onto a breadboard or any prototyping board if you have one nearby), and it too will be an exact multiple of 0.1" for the same reason.
Cancel
Vote Up +3 Vote Down

Sign in to reply

Cancel