Hi vertical farmers,
The purpose of this post is to share our source code.
The source code can be accessed through this repository.
The repository is composed by the following modules:
- Grow Sharp Base controller (firmware running on one EZR32WG board to handle the communication with the Raspberry Pi);
- Grow Sharp Hydroponic Node (firmware running on another EZR32WG board connected to farm sensors and MPPT board);
- Grow Sharp Maximum Power Point Tracking Node (firmware of photovoltaic system);
- Grow Sharp Maximum Power Point Tracking PCB (PCB layout files designed on KiCad).
Thanks for following and keep connected!
Top Comments