Actions
Forum Thread Details
  • State Suggested Answer
  • Replies 34 replies
  • Answers 4 answers
  • Subscribers 38 subscribers
  • Views 4177 views
  • Users 0 members are here
Related

AVR Development Board (Schematic)

steve25

Hi all,

 

I found a schematic about a AVR development board and modified it with a 8 pin socket. Im a newby with electronics so i hoped somebody could tell me if this could work and if it doesn't were i made a mistake.

 

Hope to get a respond!

 

image

Parents
  • 0

    image

    Hi everyone,

    Here is my version of the AVR development board that I made. It consists of AVRISPMKII programmer, Power Board which supplies 5V to the target chip for programming, ATtiny Adapter Board, ATmega 28 Pin Adapter Board and a wall wart power supply (not shown).

    I went with a modular approach where you can program various Atmel chips by making chip specific adapter boards.

    I have tested and verified the adapter boards work properly.

    If any one is interested in my design I will supply the art work and part list needed to make the AVR development Boards.

     

    Let me know..

    Thanks

    Sparky2K7

Reply
  • 0

    image

    Hi everyone,

    Here is my version of the AVR development board that I made. It consists of AVRISPMKII programmer, Power Board which supplies 5V to the target chip for programming, ATtiny Adapter Board, ATmega 28 Pin Adapter Board and a wall wart power supply (not shown).

    I went with a modular approach where you can program various Atmel chips by making chip specific adapter boards.

    I have tested and verified the adapter boards work properly.

    If any one is interested in my design I will supply the art work and part list needed to make the AVR development Boards.

     

    Let me know..

    Thanks

    Sparky2K7

Children