20 PCB Design Pitfalls -- Episode 385

PCB Design Pitfalls

element14 Presents | MAYER MAKES VCP Profile | Project Videos

Who let the smoke out?

Clem had a custom PCB manufactured but got tripped up by some PCB design pitfalls that released the magic smoke on the first test run. Today, he shares his Top 20 Tips and Tricks to avoid common PCB design pitfalls and keep your project on track! These beautiful PCBs were made by Aisler.net in Germany, but even the best manufacturer can‘t fix errors made while designing the boards.

Share your PCB Design Tips in the comments below!

Software used KiCad: download at KiCad EDA

PCBs manufactured by Aisler in Germany Aisler.net A Maker run business, founded by Felix Plitzko of Freie Maker e.V.,Germany

They also do different size batch runs for Makers like Crowdfunding campaigns, perks and Patreon rewards as well as full scale production runs.

Actions

Top Comments

Parents

danielw over 6 years ago

Nice video, and nice explosion!
Definitely check, sleep, then check again! On one PCB I designed in a rush, I missed off pin 1 reference for one of the custom ic's it's a nightmare. In my head at the time the way the chip goes on was obvious, so I didn't check it. When it came to production I got a call while I was on holiday from a confused assembly company. Lucky all the ic's were the same orientation!

Dan.
- Cancel
- Vote Up +1 Vote Down
- Sign in to reply
- More
- Cancel
mayermakes over 6 years ago in reply to danielw

nobody is invincible! thanks for sharing your experience!
- Cancel
- Vote Up +1 Vote Down
- Sign in to reply
- More
- Cancel
danielw over 6 years ago in reply to mayermakes

You're welcome,
Where I used to work we had a first off challenge of only one cut and one strap on prototype boards.
I've been looking for the Dave who does the PCB badges. Do you have a link?

Dan.
- Cancel
- Vote Up 0 Vote Down
- Sign in to reply
- More
- Cancel

Comment

danielw over 6 years ago in reply to mayermakes

You're welcome,
Where I used to work we had a first off challenge of only one cut and one strap on prototype boards.
I've been looking for the Dave who does the PCB badges. Do you have a link?

Dan.
- Cancel
- Vote Up 0 Vote Down
- Sign in to reply
- More
- Cancel

Children

mayermakes over 6 years ago in reply to danielw

you´ll find him davedarko and under the same nickname on twitter hackaday and tindie.
the episode before this one was done by him.
- Cancel
- Vote Up +2 Vote Down
- Sign in to reply
- More
- Cancel
davedarko over 6 years ago in reply to danielw

Hi Daniel, thank you for your interest. Here are some of my pcb designs
https://hackaday.io/project/25944-kitt-knight-rider-badgebrooch
https://hackaday.io/project/28330-sloth-badge
https://hackaday.io/project/33886-spacehuhn-badge
https://hackaday.io/project/162293-penghicorn
- Cancel
- Vote Up +2 Vote Down
- Sign in to reply
- More
- Cancel
danielw over 6 years ago in reply to davedarko

Dave, they are awesome!

I'd decided to make a badge a few years ago for my kids to make but never quite finished the artwork in KiCad, I did manage to buy batteries, LED's, switches... Basically everything but the PCB's I'm tempted to finish it off, however, I feel I'm going to need to make my first purchase on tindie!
Dan.
- Cancel
- Vote Up +2 Vote Down
- Sign in to reply
- More
- Cancel
davedarko over 6 years ago in reply to danielw

There are tutorials by Andrew Sowa for doing this kind of stuff in KiCad
https://www.youtube.com/watch?v=-QPkSICzRDk
- Cancel
- Vote Up +1 Vote Down
- Sign in to reply
- More
- Cancel
danielw over 6 years ago in reply to davedarko

Dave, That's a nice video and is on my watch list for the weekend.
Dan.
- Cancel
- Vote Up 0 Vote Down
- Sign in to reply
- More
- Cancel