Everybody loves a 16-bit retro gaming handheld, but that hardly justifies possibly wrecking an old original console for it. Clem encounters a random fake clone console in his storage and has nothing to lose for ripping apart a device that should not exist in the first place. By reverse engineering the pinout, and fabricating a slick case, he builds a slick retro handheld that plays and feels much better than the clone console before the conversion! Thus, possibly saving a lot of old consoles while removing knockoffs from the market!
Bill of Materials
| Product Name | Manufacturer | Quantity | Buy Kit |
|---|---|---|---|
| MULTICOMP 3D Printer Filament, PETG, 1.75 mm, Solid Grey, 250 °C Melting Temp | Multicomp | 1 | Buy Now |
| PRO SIGNAL RCA (Phono) Audio / Video Connector, 1 Contacts, Jack, Brass Body, Red, 8.3 mm | PRO SIGNAL | 1 | Buy Now |
| PRO SIGNAL RCA (Phono) Audio / Video Connector, 1 Contacts, Jack, Brass Body, White, 8.3 mm | PRO SIGNAL | 1 | Buy Now |
| MIKROELEKTRONIKA Rechargeable Battery, 3.7 V, Lithium Polymer, 2 Ah, Wire Leads | MIKROELEKTRONIKA | 1 | Buy Now |
| OMRON Tactile Switch, B3F Series, Top Actuated, Through Hole, Round Button, 100 gf, 50mA at 24VDC | OMRON | 13 | Buy Now |
| VISATON Speaker, Mini, Full Range, 1.6 cm, 500 mW, 50 ohm, 71 dB, 700 Hz to 20 kHz | VISATON | 1 | Buy Now |
| HARTING D Sub Connector, Right Angle, DB9, Standard, Plug, 9 Contacts, DE, Solder | HARTING | 1 | Buy Now |
| LOCTITE Super Glue, Low Viscosity, 20 g, Cyanoacrylate, Humidity | LOCTITE | 1 | Buy Now |
Additional Parts:
| Product Name | Quantity |
|---|---|
|
Fake Game Console |
1 |
|
Wires |
1 |
|
Hot glue |
1 |
|
PMMA sheet 3mm |
1 |
DIY Retro Gaming Portable on a Budget!
Top Comments
-
kmikemoo
-
Cancel
-
Vote Up
+1
Vote Down
-
-
Sign in to reply
-
More
-
Cancel
-
mayermakes
in reply to kmikemoo
-
Cancel
-
Vote Up
+1
Vote Down
-
-
Sign in to reply
-
More
-
Cancel
Comment-
mayermakes
in reply to kmikemoo
-
Cancel
-
Vote Up
+1
Vote Down
-
-
Sign in to reply
-
More
-
Cancel
Children