DesignFlow Webinar Series: Test and Verification: The Defining Moments
Presenter
Trevor Smith
Technical Marketing Manager, Tektronix
Debugging a Mixed Signal Design with an MSO
Embedded designers are faced with the challenges of ever-increasing system complexity that incorporate various analog and digital signals, serial buses and digital buses. During this seminar, we will look at techniques for quickly verifying and debugging mixed signal embedded designs using the powerful features of a Mixed Signal Oscilloscope (MSO).
The presentation starts with an overview of a typical mixed-signal embedded system. Next we will give an introduction to Mixed Signal Oscilloscopes (MSOs) and quick overviews of I2C and SPI buses. Then we will show two real-life examples of debugging embedded systems using a MSO.
At the end of this presentation is an overview of Tektronix MSO tools for verifying and debugging embedded systems and information references to help you verify and debug an embedded system.
Date: 23rd May 2012
Time: (2.00pm GMT) (3:00 pm BST) (10.00am EST)
DesignFlow Webinar Series;
The Design Flow Series shares knowledge and know-how with engineers from some of the world’s leading software, semiconductor and electronics companies. The practical ‘how to’ advice is structured around the electronics design flow from specification through assembled prototype and is delivered by practicing engineers who are experts in their field.
Catch Our Next DesignFlow Webinar:
Programming the Raspberry Pi with Raspberry Pi co-founder Eben Upton
Integrating software, libraries, tools and COTS components to make a real application