We will explain to you the fundamentals of creating schematic and PCB libraries and then show you how to access the >350K components in the content vault. Finally, we discuss the importance of using the real-time supplier information so that you can make intelligent component selections as you design potentially saving you thousands in redesign. |  |
Speak to an Application Engineer - Do you have questions and want to interact with one of our experienced Application Engineers?
Whether you’re already using CircuitStudio, currently evaluating it, or simply interested in what CircuitStudio is all about, we invite you to participate in a weekly CircuitStudio Quick Start Webinar Series featuring a new topic each week.
All topics will focus on getting you familiar with and up to speed quickly so that you can address these pitfalls associated with traditional design tools
Using Integrated Design Tools Increases Launch Target Hit Rate By 28%.
How do you keep your schematic and PCB in sync? Completely understand the professional grade user environment in CircuitStudio including Schematic design, PCB Design, Simulation through documentation generation (Aberdeen Group, 2014)
Duplicate Component Creation Costs $1,800 per Component.
Fully understand the Value and use of the Altium Vault Content and see how to make smart component selections at design time when it’s most important (Aberdeen Group, 2014)
Physical prototypes cost you almost $9,000 per Prototype
See how to integrate your mechanical and electrical designs in Native 3D and verify the board fits without costly re-spins and prototype iterations? (Aberdeen Group, 2010)
RSVP for the live sessions NOW!
This Series Includes All These Topics!
| Part | Topics | Date |
|---|---|---|
| Part 1 | CircuitStudio User Interface/ Starting a New Projec | July - 14 |
| Part 2 | Creating a component/ Finding and placing a component | July - 21 |
| Part 3 | The inspector panel and multi-sheet design | July - 28 |
| Part 4 | Creating and editing board shape/ Grids and Alignment | August - 4 |
| Part 5 | Setting up Design Rules/ Routing/ Polygons and Power Planes | August - 11 |
| Part 6 | Importing enclosure .STEP Files | August - 18 |
| Part 7 | Compare Differences / Configuring and generating outputs | August - 25 |