{tabbedtable} Tab Label | Webinar | |||
---|---|---|---|---|
About This Webinar | This webinar is about designing and testing of analog circuitry with the aid of National Instruments’ LabVIEW with myDAQ and a configurable operational amplifier (opamp) mini kit from Elektor. LabVIEW is used to configure and exercise the circuit, to control the myDAQ and to graphically display measurement results. We will show how to setup LabVIEW and the myDAQ and how the system compares to a traditional laboratory setting with oscilloscopes and signal generators.
Webinar giveaway: During the webinar, we’ll be giving away one fully assembled (by Roy) Opamp Minikit for the myDAQ board.
| |||
About the Presenter | Roy Aarts is 20 years old and currently studying electrical engineering at the Zuyd University of Applied Sciences in Heerlen (the Netherlands). As part of his the third year he is doing a 6-month internship at Elektor. Roy is interested in analog circuit design and electronics in general. Besides programming Android applications he is an enthusiastic musician and plays percussion and drums in the marching band of his home town. | |||
Webinar Recording |