I have a problem running Mopidy on my RPi. I get this error message:
ERROR MPD Server startup failed: [Erno 98] Address already in use
Any suggestions on overcoming this? Do I need to assign another port to MPD in the config file?
I have a problem running Mopidy on my RPi. I get this error message:
ERROR MPD Server startup failed: [Erno 98] Address already in use
Any suggestions on overcoming this? Do I need to assign another port to MPD in the config file?
First I have to ask, are you sure that you've installed the right version for the OS you are running it on? Debian VS Raspbian makes a difference.
Thanks,
John Moosemiller
I believe it is Raspian.
From the link below I notice that there are 2 sets of installation instructions. Each specific to the type of OS it will be running on. For this software there is (apparently) a notable difference in the functionality whether it is running on a 'Hard-Float' or 'Soft-Float' OS. Outside of this I'm not sure what else I could suggest without running through your process.
Let me know if this helps at all, or if there is anything else I can help with.
http://docs.mopidy.com/en/latest/installation/raspberrypi/
John
From the link below I notice that there are 2 sets of installation instructions. Each specific to the type of OS it will be running on. For this software there is (apparently) a notable difference in the functionality whether it is running on a 'Hard-Float' or 'Soft-Float' OS. Outside of this I'm not sure what else I could suggest without running through your process.
Let me know if this helps at all, or if there is anything else I can help with.
http://docs.mopidy.com/en/latest/installation/raspberrypi/
John