I‘m busy laying out a PCB for a prototype for that instrument control board Jan has linked to. Also waiting for delivery of a new DMM and PSU (slightly early birthday present). And barbecuing like an Aussie!
I Have a fair bit of gardening to do but it’s way too hot for digging so that’s on hold.
The DMM6500 is very nice and good value (and has more features) compared with the Keysight 3446x range - however I find that my DMM6500 has migrated to the temperature test rig corner and its the 34465 that gets used every day !
You do pay half as much again for the approaching the same features on the Keysight, but the ergonomics are just so much nicer (this may be a personal thing.)
MK
I managed to become fluent with the DMM6x touch screen interface. The fingers fly over the LCD.
In particular when setting it up for a low noise DC V or I measurement or to take a set of samples to work with the statistics , the muscle memory has kicked in.
The DMM6500 is very nice and good value (and has more features) compared with the Keysight 3446x range - however I find that my DMM6500 has migrated to the temperature test rig corner and its the 34465 that gets used every day !
You do pay half as much again for the approaching the same features on the Keysight, but the ergonomics are just so much nicer (this may be a personal thing.)
I vacillated for ages Gene. I'd be at a Keithley DMM6500 one minute then a Siglent SDM3055X the next, then there was the refurbished Siglent SDM3065X that's available for little more than the SDM3055X! Round-and-round we go. I even got a spreadsheet out and worked out what 5.5 digits vs 6.5 digits meant in reality - heads up: sweet FA in reality, unless of course you're interested in really low power devices. There are other features on these besides baseline accuracy of course and in the end that's what I went with: the Keithley because of its interface and programmability and because I could afford it so why the heck not. At least it will last me out.
I vacillated for ages Gene. I'd be at a Keithley DMM6500 one minute then a Siglent SDM3055X the next, then there was the refurbished Siglent SDM3065X that's available for little more than the SDM3055X! Round-and-round we go. I even got a spreadsheet out and worked out what 5.5 digits vs 6.5 digits meant in reality - heads up: sweet FA in reality, unless of course you're interested in really low power devices. There are other features on these besides baseline accuracy of course and in the end that's what I went with: the Keithley because of its interface and programmability and because I could afford it so why the heck not. At least it will last me out.
The DMM6500 is very nice and good value (and has more features) compared with the Keysight 3446x range - however I find that my DMM6500 has migrated to the temperature test rig corner and its the 34465 that gets used every day !
You do pay half as much again for the approaching the same features on the Keysight, but the ergonomics are just so much nicer (this may be a personal thing.)
MK
I managed to become fluent with the DMM6x touch screen interface. The fingers fly over the LCD.
In particular when setting it up for a low noise DC V or I measurement or to take a set of samples to work with the statistics , the muscle memory has kicked in.
The DMM6500 is very nice and good value (and has more features) compared with the Keysight 3446x range - however I find that my DMM6500 has migrated to the temperature test rig corner and its the 34465 that gets used every day !
You do pay half as much again for the approaching the same features on the Keysight, but the ergonomics are just so much nicer (this may be a personal thing.)
