Sensor

Question

How can I connect a sharp sensor ( GP2Y0A41SK0F GP2Y0A41SK0F to an Arduino Wich cable do i need to buy

koudelad · Answer

Hello, if you don't find a cable, here are the components to make your own. The connector on the sensor is S3B-PH . Have a look into the datasheet . The housing is PHR-3 The contacts are SPH-002T-P0.5S , SPH-002T-P0.5L or SPH-004T-P0.5S . You may also need the crimp tool WC-240

koudelad · Answer

OK, you are saying you need to connect it to an Arduino. What connector do you expect to have on the other end?

jw0752 · Answer

Hi Arthur, Here is another good option if you are in the US and want it fast. https://www.sparkfun.com/products/8733 John

arthur_hellemans · Answer

just the three cables: ground, data, voltage-pin.

gadget.iom · Answer

Like this? 5 Micro JST 2.0 PH-3-Pin Female WireS WITH MALE CONNECTOR PLUG QTY 5-26 AWG 300V | eBay

Sensor

Top Replies