Been playing around with a DC motor #learningByDoing
And found for some reason, my DC motor wont discharge at a normal rate/instant,
It's as if it keeps power, but it's slowing down, slower.. slower.. slower.. until it finally stops.
The motor is connected to the black/red wires to the left, and have a diode as fly back.
It's grounded through the P-fet in the top, via the red wire, and green to ground.
Yellow is the signal from the arduino on port A0,
See the video --
So what am i doing wrong here, since the charge is not instant?
any ideas ? 
