Please send me the bsp of the board Ultrazed-3EG-IO- Card
I have used three commands in the previous board ultra96-v1 and v2 that worked not as now
petalinux-config --get-hw-description /tools/PetaLinux2018.3/debug_board_config/hdf
petalinux-build
petalinux-package --boot --format BIN --fsbl /tools/PetaLinux2018.3/petalinux/debug_board_2/xilinx-ultra96-reva-2018.3/images/linux/zynqmp_fsbl.elf --u-boot /tools/PetaLinux2018.3/petalinux/debug_board_2/xilinx-ultra96-reva-2018.3/images/linux/u-boot.elf --pmufw /tools/PetaLinux2018.3/petalinux/debug_board_2/xilinx-ultra96-reva-2018.3/images/linux/pmufw.elf --fpga /tools/PetaLinux2018.3/petalinux/debug_board_2/xilinx-ultra96-reva-2018.3/images/linux/*.bit --force
The BOOT.bin was taken form SDCARD partial "demo " and the image.ub ---> I am not sure they are required or they are created in the command.
Please send me all files I need to use for SDCARD creation, bsp, boot.bin, image.ub,
Do I need ext4 or ext3?
Is the SDcard should be 4GB as I got 16GB in the box of the UltraZed-3EG-io-card?
What partition I need to set D:1G boot and E: 13.92G ?
Thanks very much in advance,
Shiri
