Actions
Forum Thread Details
  • State Verified Answer
  • Replies 9 replies
  • Subscribers 348 subscribers
  • Views 1231 views
  • Users 0 members are here
Related

Regarding AES-ULTRA96-V2-G SDSoC licence voucher

anuj.s.shah

Hello I have got sample AES-ULTRA96-V2-G board but it didn't come with Licence voucher for SDSoC. Can you please help me with license voucher? I will really appreciate it.

Parents
  • 0

    The license voucher should have been included. I will PM you with instructions.

    Bryan

  • 0 in reply to bhfletcher

    Hello Bryan,

     

    No the box was without license voucher. I also purchased additional starter kit and also Jtag but without software i am unable to do anything.

  • 0 in reply to anuj.s.shah

    Hi there,

     

    Bryan stated he would PM you with instructions.

    In the mean time, you can use this WITHOUT a license.  The Vivado/SDK/PetaLinux portions are fine without a license.  Unless you are using SDSoC you will not need this as the device on there falls under the WebPack licensing.

    PLUS even if you WANT to use SDSoC, you can use that without a license for 30 days.

     

    If you are moving to Vitis, you do not need that license either.

     

    --Dan

  • 0 in reply to anuj.s.shah

    All Ultra96-V2 kits should include the voucher. While mistakes are rare, it can happen, so I have forwarded your information to our production team. The accessories like the JTAG/UART Pod, 4A Power Supply, and Click Mezzanine do not include license vouchers.

     

    However, the SDSoC License Voucher is really only needed for SDSoC, which only applies to 2019.1 tools and earlier. You can generate a free Vivado WebPACK license which will cover the ZU3EG device on the Ultra96-V2 for any version of Xilinx tools. Additionally, Vitis 2019.2 now replaces SDSoC, and Vitis does not require a license.

     

    https://www.xilinx.com/products/design-tools/vivado/vivado-webpack.html

     

    Bryan

  • 0 in reply to bhfletcher

    Hello Bryan,

     

    Thank you again for the help. I am trying to work on the project soon so i am trying to get on speed and i have purchased training courses on the https://www.hackster.io/ , in the training requirement, there is prerequisites of having SDSoC licence voucher. The kit I have is from 2018/2019 please see the attached. I am fairly new to FPGA and following the tutorial. The 30 days eval license you have provided me in the link wont be sufficient as the training requirement has indicated mandatory following:image

    image

    image

     

    Please do let me know if this helps. I can try with the vivado webpack link you provided but i am not sure if that will work with my training. As you guys are expert please advise and i will follow your instructions. Thank you very much.

  • 0 in reply to anuj.s.shah

    The board you show is an Ultra96-V1, which we haven't sold for 2 years now. It will still work for the courses, but it's unusual for a missing license voucher to be reported >2 years after the kit shipped.

     

    The licensing requirements for all 6 courses were summarized at Hackster. In terms of what licenses you will actually need, see below:

    CourseLicense Required
    Developing Zynq UltraScale + MPSoC Softwarenone
    Developing Zynq UltraScale + MPSoC HardwareVivado -- webPACK is fine
    Integrating Sensors on Ultra96 with PetaLinux 2018.3none

    A Practical Guide to Getting Started with Xilinx

    SDSoC 2018.3

    		SDSoC
    Introduction to Deep Learning with Xilinx SoCsVivado -- webPACK is fine
    Turbocharge Python with Ultra96 PYNQnone

     

    You can do 5 of the 6 courses without the SDSoC license. You can even install the SDx version of the tools as specified in the instructions. Download and installation do not require a license, only operation. You can install the SDSoC license right before you are ready to do the SDSoC course.

     

    Bryan

  • 0 in reply to bhfletcher

    Hi Bryan,

     

    Thank you so much for detailed information and giving me a structure how to proceed.

     

    The problem is I never got chance to work on FPGA. Now I have been involve with the project so started getting into FPGA world.

     

     

    I can definitely get started with the above instructions but please do let me know if I can still get the license voucher? That would be a big relief.

Reply Children
No Data