Actions
Forum Thread Details
  • State Not Answered
  • Replies 2 replies
  • Subscribers 323 subscribers
  • Views 248 views
  • Users 0 members are here
Related

Maaxboard-rt parallel camera

zohargolan

Hi all,
I need to connect a parallel CSI camera to the Maaxboard-RT and I cannot find schematics or the pinout for the Raspberry-PI connectors. Is there an app note or a project using a parallel camera?
Thank you for your help,
Zohar

Parents
  • 0

    I'm just a random engineer passing by, so apologies if I'm not really understanding this.

    Are you interested in the camera side of the interface or the board side? The schematics for the various Pi cameras are published on their website. If you are sure that the Maaxboard-RT CSI connector is compatible with the Pi cameras (very possible, as it's a good design decision with so many cameras readily available for that pin-out; though the short-form that is the only hardware info directly available on the Tria website doesn't actually say that it is), then doesn't that give you enough info for getting other image sensors with a CSI-MIPI interface connected?

    On the board side, the CSI-MIPI connects to a dedicated interface on the processor, so can't you get all you need for that from NXP support material for the processor?

    From watching replies to other Avnet board queries, it seems to me that they are always reluctant to hand out detailed hardware information and often suggest speaking to an FAE for your area to obtain information (presumably under NDA), so you might find that route quicker than hoping for a reply here.

Reply
  • 0

    I'm just a random engineer passing by, so apologies if I'm not really understanding this.

    Are you interested in the camera side of the interface or the board side? The schematics for the various Pi cameras are published on their website. If you are sure that the Maaxboard-RT CSI connector is compatible with the Pi cameras (very possible, as it's a good design decision with so many cameras readily available for that pin-out; though the short-form that is the only hardware info directly available on the Tria website doesn't actually say that it is), then doesn't that give you enough info for getting other image sensors with a CSI-MIPI interface connected?

    On the board side, the CSI-MIPI connects to a dedicated interface on the processor, so can't you get all you need for that from NXP support material for the processor?

    From watching replies to other Avnet board queries, it seems to me that they are always reluctant to hand out detailed hardware information and often suggest speaking to an FAE for your area to obtain information (presumably under NDA), so you might find that route quicker than hoping for a reply here.

Children
No Data