zynq mini-itx cannot boot

we have a mini-itx and it worked for two weeks after that it cannot boot in any mode and leds are in strange state just d22 and d23 are on when we power on board you can see picture of it in http://tinypic.com/view.php?pic=5buzv9&s=8#.VD4ZUdYvDZs
how to fix it?
thank you

Parents

0 Former Member over 11 years ago

In the picture it appears that the smaller four pin power connector from the ATX power supply is not plugged into the Mini-ITX power connector. You should insert the 4-wire connector first, on the end nearest the board edge, followed by the larger connector. Push the larger connector down until the retainer clip snaps into place.

-Gary
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Reply

0 Former Member over 11 years ago

In the picture it appears that the smaller four pin power connector from the ATX power supply is not plugged into the Mini-ITX power connector. You should insert the 4-wire connector first, on the end nearest the board edge, followed by the larger connector. Push the larger connector down until the retainer clip snaps into place.

-Gary
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Children

No Data