AXI Transer between linux and FPGA

shanbhagm over 6 years ago

Hi,

My requirement is to transfer data from FPGA to ARM(linux) and back. I want to use the AXI bus interface.

Can some one point me to aworking example of data transfer from linux to the FPGA and vise versa.

A quick help will be appreciable.

-Madhav

Parents

0 jafoste4 over 6 years ago

Hello,
Please use the suggested tool set to complete this Speedway. That would be 2017.4 or 2017.1 tool sets.
--Josh
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 shanbhagm over 6 years ago in reply to jafoste4

I installed 2017.4 and I get same error:
Are you sure it worked with 2017.4?

training@training-VirtualBox:~/labs/lab1/petalinux-min$ petalinux-config --get-hw-description=/home/training/hdl/Projects/minized_sensor_fusion/MINIZED/minized_sensor_fusion.sdk
INFO: Getting hardware description...
cp: omitting directory '/home/training/hdl/Projects/minized_sensor_fusion/MINIZED/minized_sensor_fusion.sdk/minized_sensor_fusion_bsp'
cp: omitting directory '/home/training/hdl/Projects/minized_sensor_fusion/MINIZED/minized_sensor_fusion.sdk/minized_sensor_fusion_hw'
cp: omitting directory '/home/training/hdl/Projects/minized_sensor_fusion/MINIZED/minized_sensor_fusion.sdk/zynq_fsbl_app'
cp: omitting directory '/home/training/hdl/Projects/minized_sensor_fusion/MINIZED/minized_sensor_fusion.sdk/zynq_fsbl_bsp'
INFO: Rename minized_sensor_fusion_hw.hdf to system.hdf
[INFO] generating Kconfig for project

[INFO] menuconfig project
/home/training/labs/lab1/petalinux-min/build/misc/config/Kconfig.syshw:30:warning: defaults for choice values not supported
/home/training/labs/lab1/petalinux-min/build/misc/config/Kconfig:568:warning: config symbol defined without type
configuration written to /home/training/labs/lab1/petalinux-min/project-spec/configs/config

*** End of the configuration.
*** Execute 'make' to start the build or try 'make help'.

[INFO] sourcing bitbake
[INFO] generating plnxtool conf
[INFO] generating meta-plnx-generated layer
~/labs/lab1/petalinux-min/build/misc/plnx-generated ~/labs/lab1/petalinux-min
~/labs/lab1/petalinux-min
[INFO] generating machine configuration
[INFO] generating bbappends for project . This may take time !
~/labs/lab1/petalinux-min/build/misc/plnx-generated ~/labs/lab1/petalinux-min
~/labs/lab1/petalinux-min
[INFO] generating u-boot configuration files

[INFO] generating kernel configuration files
[INFO] generating kconfig for Rootfs
Generate rootfs kconfig
[INFO] oldconfig rootfs
[INFO] generating petalinux-user-image.bb
training@training-VirtualBox:~/labs/lab1/petalinux-min$ petalinux-build
[INFO] building project
[INFO] sourcing bitbake
INFO: bitbake petalinux-user-image
Loading cache: 100% |############################################| Time: 0:00:01
Loaded 3258 entries from dependency cache.
Parsing recipes: 100% |##########################################| Time: 0:00:02
Parsing of 2466 .bb files complete (2429 cached, 37 parsed). 3259 targets, 226 skipped, 0 masked, 0 errors.
NOTE: Resolving any missing task queue dependencies
Initialising tasks: 100% |#######################################| Time: 0:00:07
Checking sstate mirror object availability: 100% |###############| Time: 0:00:31
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
ERROR: device-tree-generation-xilinx+gitAUTOINC+3c7407f6f8-r0 do_configure: Function failed: do_configure (log file is located at /home/training/labs/lab1/petalinux-min/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/device-tree-generation/xilinx+gitAUTOINC+3c7407f6f8-r0/temp/log.do_configure.31780)
ERROR: Logfile of failure stored in: /home/training/labs/lab1/petalinux-min/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/device-tree-generation/xilinx+gitAUTOINC+3c7407f6f8-r0/temp/log.do_configure.31780
Log data follows:
| DEBUG: Executing python function sysroot_cleansstate
| DEBUG: Python function sysroot_cleansstate finished
| DEBUG: Executing shell function do_configure
| MISC_ARG is -yamlconf /home/training/labs/lab1/petalinux-min/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/device-tree-generation/xilinx+gitAUTOINC+3c7407f6f8-r0/device-tree-generation.yaml
| APP_ARG is -app "device-tree"
| cmd is: xsct /home/training/labs/lab1/petalinux-min/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/device-tree-generation/xilinx+gitAUTOINC+3c7407f6f8-r0/dtgen.tcl -ws /home/training/labs/lab1/petalinux-min/build/../components/plnx_workspace/device-tree -pname device-tree-generation -rp /home/training/labs/lab1/petalinux-min/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/device-tree-generation/xilinx+gitAUTOINC+3c7407f6f8-r0/git -processor ps7_cortexa9_0 -hdf /home/training/labs/lab1/petalinux-min/build/tmp/deploy/images/plnx_arm/Xilinx-plnx_arm.hdf -arch 32 -app "device-tree" -yamlconf /home/training/labs/lab1/petalinux-min/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/device-tree-generation/xilinx+gitAUTOINC+3c7407f6f8-r0/device-tree-generation.yaml
| CRITICAL WARNING: [Board 49-71] The board_part definition was not found for em.avnet.com:minized:part0:1.2. The project's board_part property was not set, but the project's part property was set to xc7z007sclg225-1. Valid board_part values can be retrieved with the 'get_board_parts' Tcl command. Check if board.repoPaths parameter is set and the board_part is installed from the tcl app store.
| INFO: [Hsi 55-1698] elapsed time for repository loading 0 seconds
| hsi::open_hw_design: Time (s): cpu = 00:00:05 ; elapsed = 00:00:06 . Memory (MB): peak = 420.281 ; gain = 83.949 ; free physical = 144 ; free virtual = 6269
| ERROR: [Common 17-55] 'get_property' expects at least one object.
| Resolution: If [get_<value>] was used to populate the object, check to make sure this command returns at least one valid object.
| ERROR: [Hsi 55-1545] Problem running tcl command ::sw_device_tree::post_generate : ERROR: [Common 17-55] 'get_property' expects at least one object.
| Resolution: If [get_<value>] was used to populate the object, check to make sure this command returns at least one valid object.
|
| while executing
| "get_property IP_NAME [get_cells -hier $proc_name]"
| (procedure "update_cpu_node" line 23)
| invoked from within
| "update_cpu_node $os_handle"
| (procedure "::sw_device_tree::post_generate" line 4)
| invoked from within
| "::sw_device_tree::post_generate device_tree"
| ERROR: [Hsi 55-1443] Error(s) while running TCL procedure post_generate()
| generate_target failed
| while executing
| "error "generate_target failed""
| invoked from within
| "if {[catch {hsi generate_target -dir $project} res]} {
| error "generate_target failed"
| }"
| (file "/home/training/labs/lab1/petalinux-min/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/device-tree-generation/xilinx+gitAUTOINC+3c7407f6f8-r0/dtgen.tcl" line 33)
| WARNING: /home/training/labs/lab1/petalinux-min/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/device-tree-generation/xilinx+gitAUTOINC+3c7407f6f8-r0/temp/run.do_configure.31780:1 exit 1 from 'eval xsct /home/training/labs/lab1/petalinux-min/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/device-tree-generation/xilinx+gitAUTOINC+3c7407f6f8-r0/dtgen.tcl -ws /home/training/labs/lab1/petalinux-min/build/../components/plnx_workspace/device-tree -pname device-tree-generation -rp /home/training/labs/lab1/petalinux-min/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/device-tree-generation/xilinx+gitAUTOINC+3c7407f6f8-r0/git -processor ps7_cortexa9_0 -hdf /home/training/labs/lab1/petalinux-min/build/tmp/deploy/images/plnx_arm/Xilinx-plnx_arm.hdf -arch 32 ${APP_ARG} ${MISC_ARG}'
| ERROR: Function failed: do_configure (log file is located at /home/training/labs/lab1/petalinux-min/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/device-tree-generation/xilinx+gitAUTOINC+3c7407f6f8-r0/temp/log.do_configure.31780)
ERROR: Task (/opt/petalinux-v2017.4-final/components/yocto/source/arm/layers/meta-xilinx-tools/recipes-bsp/device-tree/device-tree-generation_git.bb:do_configure) failed with exit code '1'
ERROR: fsbl-2017.4+gitAUTOINC+77448ae629-r0 do_configure: Function failed: do_configure (log file is located at /home/training/labs/lab1/petalinux-min/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/fsbl/2017.4+gitAUTOINC+77448ae629-r0/temp/log.do_configure.9413)
ERROR: Logfile of failure stored in: /home/training/labs/lab1/petalinux-min/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/fsbl/2017.4+gitAUTOINC+77448ae629-r0/temp/log.do_configure.9413
Log data follows:
| DEBUG: Executing python function sysroot_cleansstate
| DEBUG: Python function sysroot_cleansstate finished
| DEBUG: Executing shell function do_configure
| MISC_ARG is -yamlconf /home/training/labs/lab1/petalinux-min/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/fsbl/2017.4+gitAUTOINC+77448ae629-r0/fsbl.yaml
| APP_ARG is -app "Zynq FSBL"
| cmd is: xsct /home/training/labs/lab1/petalinux-min/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/fsbl/2017.4+gitAUTOINC+77448ae629-r0/app.tcl -ws /home/training/labs/lab1/petalinux-min/build/../components/plnx_workspace/fsbl -pname fsbl -rp /opt/petalinux-v2017.4-final/tools/hsm/data/embeddedsw -processor ps7_cortexa9_0 -hdf /home/training/labs/lab1/petalinux-min/build/tmp/deploy/images/plnx_arm/Xilinx-plnx_arm.hdf -arch 32 -app "Zynq FSBL" -yamlconf /home/training/labs/lab1/petalinux-min/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/fsbl/2017.4+gitAUTOINC+77448ae629-r0/fsbl.yaml
| Starting xsdk. This could take few seconds... Picked up _JAVA_OPTIONS: -Duser.home=/home/training/labs/lab1/petalinux-min/build/tmp/xsctenv
| done
| Importing project fsbl... [DONE]
| INFO: [Hsi 55-1698] elapsed time for repository loading 0 seconds
| CRITICAL WARNING: [Board 49-71] The board_part definition was not found for em.avnet.com:minized:part0:1.2. The project's board_part property was not set, but the project's part property was set to xc7z007sclg225-1. Valid board_part values can be retrieved with the 'get_board_parts' Tcl command. Check if board.repoPaths parameter is set and the board_part is installed from the tcl app store.
| hsi::open_hw_design: Time (s): cpu = 00:00:05 ; elapsed = 00:00:06 . Memory (MB): peak = 359.957 ; gain = 82.336 ; free physical = 133 ; free virtual = 4899
| INFO: create app using fsbl_hwproj project
| Project with name 'fsbl' already exists in workspace.
| Failed to create Application project fsbl.Project with name fsbl already exists in workspace.
| while executing
| "error [dict get $msg err]"
| (procedure "xsdk_eval" line 15)
| invoked from within
| "xsdk_eval $chan "Xsdk" createProject "o{$fmt}" e [list $data]"
| (procedure "createapp" line 76)
| invoked from within
| "createapp -name $params(pname) -proc $params(processor) -hwproject $params(hwpname) -os $params(osname) -lang c -app $params(app) -arch $params(arch..."
| invoked from within
| "if { $params(ws) ne "" } {
| #Local Work Space available
| setws $params(ws)
| if { [catch {importprojects $params(ws)} result] } {
| puts "XSCTHELPER IN..."
| (file "/home/training/labs/lab1/petalinux-min/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/fsbl/2017.4+gitAUTOINC+77448ae629-r0/app.tcl" line 120)
| WARNING: /home/training/labs/lab1/petalinux-min/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/fsbl/2017.4+gitAUTOINC+77448ae629-r0/temp/run.do_configure.9413:1 exit 1 from 'eval xsct /home/training/labs/lab1/petalinux-min/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/fsbl/2017.4+gitAUTOINC+77448ae629-r0/app.tcl -ws /home/training/labs/lab1/petalinux-min/build/../components/plnx_workspace/fsbl -pname fsbl -rp /opt/petalinux-v2017.4-final/tools/hsm/data/embeddedsw -processor ps7_cortexa9_0 -hdf /home/training/labs/lab1/petalinux-min/build/tmp/deploy/images/plnx_arm/Xilinx-plnx_arm.hdf -arch 32 ${APP_ARG} ${MISC_ARG}'
| ERROR: Function failed: do_configure (log file is located at /home/training/labs/lab1/petalinux-min/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/fsbl/2017.4+gitAUTOINC+77448ae629-r0/temp/log.do_configure.9413)
ERROR: Task (/opt/petalinux-v2017.4-final/components/yocto/source/arm/layers/meta-xilinx-tools/recipes-bsp/fsbl/fsbl_git.bb:do_configure) failed with exit code '1'
NOTE: Tasks Summary: Attempted 2343 tasks of which 1873 didn't need to be rerun and 2 failed.

Summary: 2 tasks failed:
/opt/petalinux-v2017.4-final/components/yocto/source/arm/layers/meta-xilinx-tools/recipes-bsp/device-tree/device-tree-generation_git.bb:do_configure
/opt/petalinux-v2017.4-final/components/yocto/source/arm/layers/meta-xilinx-tools/recipes-bsp/fsbl/fsbl_git.bb:do_configure
Summary: There were 2 ERROR messages shown, returning a non-zero exit code.
ERROR: Failed to build project
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Reply

0 shanbhagm over 6 years ago in reply to jafoste4

I installed 2017.4 and I get same error:
Are you sure it worked with 2017.4?

training@training-VirtualBox:~/labs/lab1/petalinux-min$ petalinux-config --get-hw-description=/home/training/hdl/Projects/minized_sensor_fusion/MINIZED/minized_sensor_fusion.sdk
INFO: Getting hardware description...
cp: omitting directory '/home/training/hdl/Projects/minized_sensor_fusion/MINIZED/minized_sensor_fusion.sdk/minized_sensor_fusion_bsp'
cp: omitting directory '/home/training/hdl/Projects/minized_sensor_fusion/MINIZED/minized_sensor_fusion.sdk/minized_sensor_fusion_hw'
cp: omitting directory '/home/training/hdl/Projects/minized_sensor_fusion/MINIZED/minized_sensor_fusion.sdk/zynq_fsbl_app'
cp: omitting directory '/home/training/hdl/Projects/minized_sensor_fusion/MINIZED/minized_sensor_fusion.sdk/zynq_fsbl_bsp'
INFO: Rename minized_sensor_fusion_hw.hdf to system.hdf
[INFO] generating Kconfig for project

[INFO] menuconfig project
/home/training/labs/lab1/petalinux-min/build/misc/config/Kconfig.syshw:30:warning: defaults for choice values not supported
/home/training/labs/lab1/petalinux-min/build/misc/config/Kconfig:568:warning: config symbol defined without type
configuration written to /home/training/labs/lab1/petalinux-min/project-spec/configs/config

*** End of the configuration.
*** Execute 'make' to start the build or try 'make help'.

[INFO] sourcing bitbake
[INFO] generating plnxtool conf
[INFO] generating meta-plnx-generated layer
~/labs/lab1/petalinux-min/build/misc/plnx-generated ~/labs/lab1/petalinux-min
~/labs/lab1/petalinux-min
[INFO] generating machine configuration
[INFO] generating bbappends for project . This may take time !
~/labs/lab1/petalinux-min/build/misc/plnx-generated ~/labs/lab1/petalinux-min
~/labs/lab1/petalinux-min
[INFO] generating u-boot configuration files

[INFO] generating kernel configuration files
[INFO] generating kconfig for Rootfs
Generate rootfs kconfig
[INFO] oldconfig rootfs
[INFO] generating petalinux-user-image.bb
training@training-VirtualBox:~/labs/lab1/petalinux-min$ petalinux-build
[INFO] building project
[INFO] sourcing bitbake
INFO: bitbake petalinux-user-image
Loading cache: 100% |############################################| Time: 0:00:01
Loaded 3258 entries from dependency cache.
Parsing recipes: 100% |##########################################| Time: 0:00:02
Parsing of 2466 .bb files complete (2429 cached, 37 parsed). 3259 targets, 226 skipped, 0 masked, 0 errors.
NOTE: Resolving any missing task queue dependencies
Initialising tasks: 100% |#######################################| Time: 0:00:07
Checking sstate mirror object availability: 100% |###############| Time: 0:00:31
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
ERROR: device-tree-generation-xilinx+gitAUTOINC+3c7407f6f8-r0 do_configure: Function failed: do_configure (log file is located at /home/training/labs/lab1/petalinux-min/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/device-tree-generation/xilinx+gitAUTOINC+3c7407f6f8-r0/temp/log.do_configure.31780)
ERROR: Logfile of failure stored in: /home/training/labs/lab1/petalinux-min/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/device-tree-generation/xilinx+gitAUTOINC+3c7407f6f8-r0/temp/log.do_configure.31780
Log data follows:
| DEBUG: Executing python function sysroot_cleansstate
| DEBUG: Python function sysroot_cleansstate finished
| DEBUG: Executing shell function do_configure
| MISC_ARG is -yamlconf /home/training/labs/lab1/petalinux-min/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/device-tree-generation/xilinx+gitAUTOINC+3c7407f6f8-r0/device-tree-generation.yaml
| APP_ARG is -app "device-tree"
| cmd is: xsct /home/training/labs/lab1/petalinux-min/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/device-tree-generation/xilinx+gitAUTOINC+3c7407f6f8-r0/dtgen.tcl -ws /home/training/labs/lab1/petalinux-min/build/../components/plnx_workspace/device-tree -pname device-tree-generation -rp /home/training/labs/lab1/petalinux-min/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/device-tree-generation/xilinx+gitAUTOINC+3c7407f6f8-r0/git -processor ps7_cortexa9_0 -hdf /home/training/labs/lab1/petalinux-min/build/tmp/deploy/images/plnx_arm/Xilinx-plnx_arm.hdf -arch 32 -app "device-tree" -yamlconf /home/training/labs/lab1/petalinux-min/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/device-tree-generation/xilinx+gitAUTOINC+3c7407f6f8-r0/device-tree-generation.yaml
| CRITICAL WARNING: [Board 49-71] The board_part definition was not found for em.avnet.com:minized:part0:1.2. The project's board_part property was not set, but the project's part property was set to xc7z007sclg225-1. Valid board_part values can be retrieved with the 'get_board_parts' Tcl command. Check if board.repoPaths parameter is set and the board_part is installed from the tcl app store.
| INFO: [Hsi 55-1698] elapsed time for repository loading 0 seconds
| hsi::open_hw_design: Time (s): cpu = 00:00:05 ; elapsed = 00:00:06 . Memory (MB): peak = 420.281 ; gain = 83.949 ; free physical = 144 ; free virtual = 6269
| ERROR: [Common 17-55] 'get_property' expects at least one object.
| Resolution: If [get_<value>] was used to populate the object, check to make sure this command returns at least one valid object.
| ERROR: [Hsi 55-1545] Problem running tcl command ::sw_device_tree::post_generate : ERROR: [Common 17-55] 'get_property' expects at least one object.
| Resolution: If [get_<value>] was used to populate the object, check to make sure this command returns at least one valid object.
|
| while executing
| "get_property IP_NAME [get_cells -hier $proc_name]"
| (procedure "update_cpu_node" line 23)
| invoked from within
| "update_cpu_node $os_handle"
| (procedure "::sw_device_tree::post_generate" line 4)
| invoked from within
| "::sw_device_tree::post_generate device_tree"
| ERROR: [Hsi 55-1443] Error(s) while running TCL procedure post_generate()
| generate_target failed
| while executing
| "error "generate_target failed""
| invoked from within
| "if {[catch {hsi generate_target -dir $project} res]} {
| error "generate_target failed"
| }"
| (file "/home/training/labs/lab1/petalinux-min/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/device-tree-generation/xilinx+gitAUTOINC+3c7407f6f8-r0/dtgen.tcl" line 33)
| WARNING: /home/training/labs/lab1/petalinux-min/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/device-tree-generation/xilinx+gitAUTOINC+3c7407f6f8-r0/temp/run.do_configure.31780:1 exit 1 from 'eval xsct /home/training/labs/lab1/petalinux-min/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/device-tree-generation/xilinx+gitAUTOINC+3c7407f6f8-r0/dtgen.tcl -ws /home/training/labs/lab1/petalinux-min/build/../components/plnx_workspace/device-tree -pname device-tree-generation -rp /home/training/labs/lab1/petalinux-min/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/device-tree-generation/xilinx+gitAUTOINC+3c7407f6f8-r0/git -processor ps7_cortexa9_0 -hdf /home/training/labs/lab1/petalinux-min/build/tmp/deploy/images/plnx_arm/Xilinx-plnx_arm.hdf -arch 32 ${APP_ARG} ${MISC_ARG}'
| ERROR: Function failed: do_configure (log file is located at /home/training/labs/lab1/petalinux-min/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/device-tree-generation/xilinx+gitAUTOINC+3c7407f6f8-r0/temp/log.do_configure.31780)
ERROR: Task (/opt/petalinux-v2017.4-final/components/yocto/source/arm/layers/meta-xilinx-tools/recipes-bsp/device-tree/device-tree-generation_git.bb:do_configure) failed with exit code '1'
ERROR: fsbl-2017.4+gitAUTOINC+77448ae629-r0 do_configure: Function failed: do_configure (log file is located at /home/training/labs/lab1/petalinux-min/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/fsbl/2017.4+gitAUTOINC+77448ae629-r0/temp/log.do_configure.9413)
ERROR: Logfile of failure stored in: /home/training/labs/lab1/petalinux-min/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/fsbl/2017.4+gitAUTOINC+77448ae629-r0/temp/log.do_configure.9413
Log data follows:
| DEBUG: Executing python function sysroot_cleansstate
| DEBUG: Python function sysroot_cleansstate finished
| DEBUG: Executing shell function do_configure
| MISC_ARG is -yamlconf /home/training/labs/lab1/petalinux-min/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/fsbl/2017.4+gitAUTOINC+77448ae629-r0/fsbl.yaml
| APP_ARG is -app "Zynq FSBL"
| cmd is: xsct /home/training/labs/lab1/petalinux-min/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/fsbl/2017.4+gitAUTOINC+77448ae629-r0/app.tcl -ws /home/training/labs/lab1/petalinux-min/build/../components/plnx_workspace/fsbl -pname fsbl -rp /opt/petalinux-v2017.4-final/tools/hsm/data/embeddedsw -processor ps7_cortexa9_0 -hdf /home/training/labs/lab1/petalinux-min/build/tmp/deploy/images/plnx_arm/Xilinx-plnx_arm.hdf -arch 32 -app "Zynq FSBL" -yamlconf /home/training/labs/lab1/petalinux-min/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/fsbl/2017.4+gitAUTOINC+77448ae629-r0/fsbl.yaml
| Starting xsdk. This could take few seconds... Picked up _JAVA_OPTIONS: -Duser.home=/home/training/labs/lab1/petalinux-min/build/tmp/xsctenv
| done
| Importing project fsbl... [DONE]
| INFO: [Hsi 55-1698] elapsed time for repository loading 0 seconds
| CRITICAL WARNING: [Board 49-71] The board_part definition was not found for em.avnet.com:minized:part0:1.2. The project's board_part property was not set, but the project's part property was set to xc7z007sclg225-1. Valid board_part values can be retrieved with the 'get_board_parts' Tcl command. Check if board.repoPaths parameter is set and the board_part is installed from the tcl app store.
| hsi::open_hw_design: Time (s): cpu = 00:00:05 ; elapsed = 00:00:06 . Memory (MB): peak = 359.957 ; gain = 82.336 ; free physical = 133 ; free virtual = 4899
| INFO: create app using fsbl_hwproj project
| Project with name 'fsbl' already exists in workspace.
| Failed to create Application project fsbl.Project with name fsbl already exists in workspace.
| while executing
| "error [dict get $msg err]"
| (procedure "xsdk_eval" line 15)
| invoked from within
| "xsdk_eval $chan "Xsdk" createProject "o{$fmt}" e [list $data]"
| (procedure "createapp" line 76)
| invoked from within
| "createapp -name $params(pname) -proc $params(processor) -hwproject $params(hwpname) -os $params(osname) -lang c -app $params(app) -arch $params(arch..."
| invoked from within
| "if { $params(ws) ne "" } {
| #Local Work Space available
| setws $params(ws)
| if { [catch {importprojects $params(ws)} result] } {
| puts "XSCTHELPER IN..."
| (file "/home/training/labs/lab1/petalinux-min/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/fsbl/2017.4+gitAUTOINC+77448ae629-r0/app.tcl" line 120)
| WARNING: /home/training/labs/lab1/petalinux-min/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/fsbl/2017.4+gitAUTOINC+77448ae629-r0/temp/run.do_configure.9413:1 exit 1 from 'eval xsct /home/training/labs/lab1/petalinux-min/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/fsbl/2017.4+gitAUTOINC+77448ae629-r0/app.tcl -ws /home/training/labs/lab1/petalinux-min/build/../components/plnx_workspace/fsbl -pname fsbl -rp /opt/petalinux-v2017.4-final/tools/hsm/data/embeddedsw -processor ps7_cortexa9_0 -hdf /home/training/labs/lab1/petalinux-min/build/tmp/deploy/images/plnx_arm/Xilinx-plnx_arm.hdf -arch 32 ${APP_ARG} ${MISC_ARG}'
| ERROR: Function failed: do_configure (log file is located at /home/training/labs/lab1/petalinux-min/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/fsbl/2017.4+gitAUTOINC+77448ae629-r0/temp/log.do_configure.9413)
ERROR: Task (/opt/petalinux-v2017.4-final/components/yocto/source/arm/layers/meta-xilinx-tools/recipes-bsp/fsbl/fsbl_git.bb:do_configure) failed with exit code '1'
NOTE: Tasks Summary: Attempted 2343 tasks of which 1873 didn't need to be rerun and 2 failed.

Summary: 2 tasks failed:
/opt/petalinux-v2017.4-final/components/yocto/source/arm/layers/meta-xilinx-tools/recipes-bsp/device-tree/device-tree-generation_git.bb:do_configure
/opt/petalinux-v2017.4-final/components/yocto/source/arm/layers/meta-xilinx-tools/recipes-bsp/fsbl/fsbl_git.bb:do_configure
Summary: There were 2 ERROR messages shown, returning a non-zero exit code.
ERROR: Failed to build project
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Children

No Data