use pcap in sdk

Hello everybody

I am a beginner using zedboads.
After reviewing some user manuals and application notes, I still don't know how to use pcap.

My goal is to design a hardware-software that partially I can reconfigure the hardware in software.

Regards
Amin

Parents

0 zedhed over 9 years ago

Hi Amin,

Partial reconfiguration is a pretty advanced topic but it can be done if you do some careful planning in your logic design. The best place to start would be to take a look at XAPP1231:

http://www.wiki.xilinx.com/XAPP1231+-+Partial+Reconfiguration+of+a+Hardware+Accelerator+with+Vivado+Design+Suite

Loading the partial bitstream to the PL is most easily done from Linux so if you are planning on running your software from Linux most of the software hooks you will need are already in place.

Regards,

-Kevin
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Reply

0 zedhed over 9 years ago

Hi Amin,

Partial reconfiguration is a pretty advanced topic but it can be done if you do some careful planning in your logic design. The best place to start would be to take a look at XAPP1231:

http://www.wiki.xilinx.com/XAPP1231+-+Partial+Reconfiguration+of+a+Hardware+Accelerator+with+Vivado+Design+Suite

Loading the partial bitstream to the PL is most easily done from Linux so if you are planning on running your software from Linux most of the software hooks you will need are already in place.

Regards,

-Kevin
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Children

0 Former Member over 9 years ago in reply to zedhed

Hi Kevin

Thanks for the reply.

Actually XAPP1231 was the first thing I did about PR; but it doesn't use Processing, so I need a Hardware-software design with ability to change the hardware module (PR) with Processor.

Regards

Amin
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel