Program ATMega of 96Boards Sensors

Question

I'm stuck trying to program the ATMega of the 96Boards Sensors. The manual asks for a Debian image that I think is not available for Ultra96-V2. I couldn't do anything with PetaLinux or the PYNQ image. Did anyone succeed on this?

Thank you,

Márcio

narrucmot · Answer

Hi Márcio,

Avnet does not sell or provide any support for the Seeed Studios Grove Sensors Mezzanine card for the Ultra96 board. This mezzanine card is also often mated to other 96boards CE edition SBCs, so you might have some luck with your questions at the 96boards.org forums:

https://www.seeedstudio.com/96Boards-Sensors.html

https://www.96boards.org/pinout/grove_seeed_sensor_mezzanine.html

https://discuss.96boards.org/t/dragonboard-410c-android-seeed-sensor-board/828

https://discuss.96boards.org/t/grove-starter-kit-for-96boards/574/3

Someone on the 96boards.org forums mentioned that the Adafruit USBtinyISP programmer pod can be used to program the ATMega on the Seeed Grove mezzanine card.

https://learn.adafruit.com/usbtinyisp/overview

--Tom

Program ATMega of 96Boards Sensors

Top Replies