UltraZed-EV and Petalinux-2019.2

khangdnl over 5 years ago

Hi experts,

I'd like to know where I can find the BSP for UltraZed-EV for using with Petalinux-2019.2, please?

Thanks in advance,

Khang

Parents

clem57 over 5 years ago

First entry show give you download instructions after google
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
khangdnl over 5 years ago in reply to clem57

clem57 wrote:

First entry show give you download instructions after google

Hi clem57,

Doing as you suggested, I could find the latest BSP of UltraZed-EV board which is 2019.1 : http://zedboard.org/support/design/25481/161

Also, another discussion thread led me to the following repo : https://github.com/Avnet/petalinux

There's apparently scripts for building the BSP within that repo but there's not official TAG for uz7ev/2019.2 yet.

Your opinion?
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
clem57 over 5 years ago in reply to khangdnl

In general, the scripts should work even if not specific to the release. But if the release changes something, they may fail. I suggest to create an issue on the GitHub for Avnet to either resolve or confirm using older scripts if you wish to may sure.
Clem
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
drozwood90 over 5 years ago in reply to clem57

HI there,

I can tell you that we are working on the 2019.2 BSP. We have some hiccups and are working through them now. I would expect that the BSP is released at the end of this month or earlier.
All packaged files would be released to the product page UltraZed-EV under reference designs

If you want the source / build scripts, you are right that they are loaded up on Github, and as you inferred, there will be a tag.

I can also say that the scripting does work across the versions - generally speaking. However, we are also integrating Vitis support and this is hanging us up. If you are not planning to use Vitis, I do believe that as clem57 suggested, the scripting will work, but i cannot be certain as we were integrating the Vitis support and did not note anything for just a version switch.

--Dan
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
spocky over 5 years ago in reply to drozwood90

Hi Dan, is there any update on when the 2019.2 BSP will be available? I am getting started working with an Ultrazed for a project with somewhat fast turn around and the updated BSP would be helpful, as we are using Vitis and the 2019.2 tools. Thanks.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel

Reply

spocky over 5 years ago in reply to drozwood90

Hi Dan, is there any update on when the 2019.2 BSP will be available? I am getting started working with an Ultrazed for a project with somewhat fast turn around and the updated BSP would be helpful, as we are using Vitis and the 2019.2 tools. Thanks.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel

Children

drozwood90 over 5 years ago in reply to spocky

My hope is this week. I wanted to release today, but we found an issue and are working on it. Sorry for the delay.

--Dan
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
drozwood90 over 5 years ago in reply to drozwood90

Hi all,

Another quick update. The files are being uploaded as I type this. I would expect everything to be released in the next day or two (depending on back end "Stuff").

We have a 2019.2 BSP, Vitis AI enabled Platform, and an example Pre-Built Vitis Application for:
UltraZed-EV
UltraZed-EG PCIeCC
UltraZed-EG IOCC
Ultra96V2

I'll try to do a consolidated post like I did for the 2019.1 release, but feel free to monitor / follow the product pages!

--Dan
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel