Actions
Forum Thread Details
  • State Not Answered
  • Replies 5 replies
  • Subscribers 327 subscribers
  • Views 742 views
  • Users 0 members are here
Related

IDT Versaclock programmation

sonictai

Hello,

I'm designing my own custom carrier board to support the UltraZed SOM and I planned to use the same IDT clock generator used on your IOCC carrier board.

The reference indicated in the BOM is 5P49V5935B521LTGI seems to be a custom reference, the "521" indicating the custom configuration. Ordering this special part from IDT is complicated (delay and important MOQ), is it possible to order it in small quantities directly from Avnet?

If not, is the programming file available in order to have exactly the same configuration starting from a blank IDT device?

Regards, Christophe

Parents
  • 0

    Hello Josh and thank you for your answer.

    I was planning to buy some 5P49V5935B521LTGI parts so thank for the correction of the reference, I have stopped my command. Taking into account the technical points that you mentioned, some others points that I was already aware, and some purchase "difficulties" from IDT I have decided to take another clock synthesizer solution.

    Regards, Christophe

  • 0 in reply to sonictai

    Hi Christophe

    Would you have a moment and the ability to tell me what your alternate solution to the IDT clock reference is?  I know I only need a reference for the USB3.0 Transceiver and Xilinx had a phase noise reference document that the Clock reference has to meet.  I believe Silicon Labs has a possible solution but I was wondering what you or others may have used as an alternative to the IDT solution.

     

    Thank you

    Gary

Reply
  • 0 in reply to sonictai

    Hi Christophe

    Would you have a moment and the ability to tell me what your alternate solution to the IDT clock reference is?  I know I only need a reference for the USB3.0 Transceiver and Xilinx had a phase noise reference document that the Clock reference has to meet.  I believe Silicon Labs has a possible solution but I was wondering what you or others may have used as an alternative to the IDT solution.

     

    Thank you

    Gary

Children
No Data