SD Card example design using standalone SDK project

Having problems using the FatFs APIs for the SD card in standalone platform ?
This article provides a step-by-step guide on configuring the SD / SDIO controller on the Zynq chip, and using the FatFs (File Allocation Table File System) Library.

http://embeddedcentric.com/data-logging-using-sd-cards/

Top Replies

narrucmot over 1 year ago in reply to jothin +1 suggested

The OP here is over 5 years old, making it quite likely the broken link won't be fixed. Hopefully it will, but just in case it isn't here are a couple of useful Xilinx resources for using the FATFS…

Parents

0 jothin over 1 year ago

Hi

The link is broken. Can you share?

J
Cancel
Up 0 Down

Reply

Verify Answer

Cancel
0 narrucmot over 1 year ago in reply to jothin

The OP here is over 5 years old, making it quite likely the broken link won't be fixed. Hopefully it will, but just in case it isn't here are a couple of useful Xilinx resources for using the FATFS sw library:

Xilinx UG643:
https://www.xilinx.com/support/documentation/sw_manuals/xilinx2020_2/oslib_rm.pdf
Xilinx wiki page:
https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/18841771/xilffs

--Tom
Cancel
Up +1 Down

Reply

Verify Answer

Reject Answer

Cancel

Reply

0 narrucmot over 1 year ago in reply to jothin

The OP here is over 5 years old, making it quite likely the broken link won't be fixed. Hopefully it will, but just in case it isn't here are a couple of useful Xilinx resources for using the FATFS sw library:

Xilinx UG643:
https://www.xilinx.com/support/documentation/sw_manuals/xilinx2020_2/oslib_rm.pdf
Xilinx wiki page:
https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/18841771/xilffs

--Tom
Cancel
Up +1 Down

Reply

Verify Answer

Reject Answer

Cancel

Children

No Data