Actions
Forum Thread Details
  • State Not Answered
  • Replies 3 replies
  • Subscribers 339 subscribers
  • Views 378 views
  • Users 0 members are here
Related

Help:how can I design PTP funcation in PS ethernet0 with zedboard

Former Member

Recently,I have been asked to design PTP clock synchronization on zedboard,but I try to search example,it seems to be there is no project about it.All I can refer to are the TRM in UG585 and the Open Source Linux Ethernet Performance.I'm a student and start to learn Zynq7000 series ,thus I don't konw how to design it and what can I set about to do? Can anyone help me,Thanks a lot!

Parents
  • 0

    You might take a look at the example code for ieee 1588 in the SDK for the ps7_ethernet_0 device. Once you have exported your Vivado hardware design to the SDK and implemented a BSP you can open up the System.mss file. Click on"Import Examples" next to the ps7_ethernet_0 under "Peripheral Drivers" and you should see a xemacps_ieee_example to import.

     

    You can also access the example code by looking in your SDK installation directory, something like this: 

    <Install> /SDK/2014.4/data/embeddedsw/XilinxProcessorIPLib/drivers/emacps_v2_2/examples

     

    -Gary

Reply
  • 0

    You might take a look at the example code for ieee 1588 in the SDK for the ps7_ethernet_0 device. Once you have exported your Vivado hardware design to the SDK and implemented a BSP you can open up the System.mss file. Click on"Import Examples" next to the ps7_ethernet_0 under "Peripheral Drivers" and you should see a xemacps_ieee_example to import.

     

    You can also access the example code by looking in your SDK installation directory, something like this: 

    <Install> /SDK/2014.4/data/embeddedsw/XilinxProcessorIPLib/drivers/emacps_v2_2/examples

     

    -Gary

Children