Zed Board

Dear Sir/Madam,

In mine project i want to send data from ubuntu PC to ZedBoard using Wifi. I got one link http://zedboard.org/product/wilink-8-adaptor which talks about some kind of Wifi adpater for Micro-zed.

Will this link and its given documents be seamlessly used with ZedBoard.

Regards

Aditya

Parents

0 jafoste4 over 8 years ago

Hi Aditya,

In experiment 2, step 5 you add -DUSE_AMP=1 to the extra_compiler_flags. You did this correct? Also double check that you put a space infront of it. So based off of figure 16 it would look like "-g -DUSE_AMP=1". (see the space I put inbetween -g and Duse)
--Josh
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Reply

0 jafoste4 over 8 years ago

Hi Aditya,

In experiment 2, step 5 you add -DUSE_AMP=1 to the extra_compiler_flags. You did this correct? Also double check that you put a space infront of it. So based off of figure 16 it would look like "-g -DUSE_AMP=1". (see the space I put inbetween -g and Duse)
--Josh
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Children

0 100aditya over 8 years ago in reply to jafoste4

Hi Josh,
Thanks for this subtle information. Now i came to mine room ,tomorrow i will apply this and let you know.

Regards
Aditya
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 100aditya over 8 years ago in reply to 100aditya

Hi Josh,
I applied the method that you told but it did not work.

Regards
Aditya
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 100aditya over 8 years ago in reply to 100aditya

Hi Josh,
i tried mine bset but failed. But this is some tricky issue and i found that some other people have also faced this but the answer that they have got is not very clear. Like here i am giving here one link:-https://forums.xilinx.com/t5/Embedded-Development-Tools/AMP-on-Zynq-starting-from-SDK/td-p/668688
But link content is not clear to me. I downloaded the things but it is not working???
Do you have some suggestion???
Regards
Aditya
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 jafoste4 over 8 years ago in reply to 100aditya

Hi Aditya,
I'll explain to you what they are referencing in the link you provided. Prior to Vivado 2016.2, the standard BSP that you can generate within SDK could not target CPU1 in a baremetal application. To access CPU1 in a baremetal application you needed to take the BSP template that they offer for your SDK version and modify it to working with CPU1. Luckily for you we did this already. If you look in your 2014.4 lab you will find it at
ZynqSW ->2014.4.-->Support_documents-->sdk_repo-->bsp-->standalone_amp_v4_2
That is why we have you add sdk_repo into the repositories during Lab 9 experiment 2 step 1-2.
--Josh
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel