Actions
Forum Thread Details
  • State Not Answered
  • Replies 2 replies
  • Subscribers 331 subscribers
  • Views 597 views
  • Users 0 members are here
Related

programming the FPGA on zedboard

Former Member

Hello,

I wanted to know how could I program the FPGA on the zedboard, as i have tried to program it with adapt it was not possible. I have a VGA display code which was originally implemented for sparten 6 board,trying to implement the same on zedboard. I want to program just the FPGA not the arm processor. any ideas, hints will be helpful.

thank you ......

Parents
  • 0

    Another option would be to 'export' your design (including bitstream) to the SDK, even if you don't plan to run an application on the Zynq processor, and use the 'Program FPGA' option under the 'Xilinx Tools' SDK tool bar selection.

     

    Ultimately you will need to build at least a minimal Zynq project to load the bitstream of you plan to have your design boot from non-volatile memory and run without using the JTAG interface.

     

    -Gary

Reply
  • 0

    Another option would be to 'export' your design (including bitstream) to the SDK, even if you don't plan to run an application on the Zynq processor, and use the 'Program FPGA' option under the 'Xilinx Tools' SDK tool bar selection.

     

    Ultimately you will need to build at least a minimal Zynq project to load the bitstream of you plan to have your design boot from non-volatile memory and run without using the JTAG interface.

     

    -Gary

Children
No Data