Zedboard power up fail

Hi sir,

When I power on the Zedboard, the LD13(power) doesn't light and LD0 ~ LD7 all RED.

The only action was that I shorted the 3.3V of J18.
After that, the Zedboard seems crashed?

Could I reset it by myself?

BR
Blake

Parents

0 jafoste4 over 7 years ago

Hi Blake,
I don;t know if that is the problem, as Chris mentioned above it could be another issue not yet identified. Like I mentioned earlier, before replacing IC27 i would suggest you verify all the pins going into IC27 are operating as expected. Refer to the datasheet for that part.
-Josh
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Reply

0 jafoste4 over 7 years ago

Hi Blake,
I don;t know if that is the problem, as Chris mentioned above it could be another issue not yet identified. Like I mentioned earlier, before replacing IC27 i would suggest you verify all the pins going into IC27 are operating as expected. Refer to the datasheet for that part.
-Josh
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Children

No Data