PCIe Link connection on Zed/Microzed board

Hi,

Does any of the Zed/Microzed boards have a PCIe capable
daughter cards, I'm planning to connect PCIe NIC card
on board using a dauaghter card where PCIe could be a Soft IP.

Request for help!

thanks!
Jagan.

Parents

0 drozwood90 over 11 years ago

Jagan,

The Zedboard and MicroZed do not have transceivers on them. The Mini-ITX:
http://www.em.avnet.com/en-us/design/drc/Pages/Xilinx-Zynq-7000-All-Programmable-SoC-Mini-ITX-Development.aspx

or Mini Module Plus (MMP):
http://www.em.avnet.com/en-us/design/drc/Pages/Xilinx-Zynq-7000-SoC-Mini-Module-Plus-Development-Kit.aspx

has transceivers. You can also look at the ZC706 from Xilinx.

The Mini-ITX has a PCIe Slot.

The MMP requires you to purchase carrier boards so that you get a MMP that suits your needs, as shown on this page:
http://www.em.avnet.com/en-us/design/drc/Pages/Mini-Module-Plus-Development-Kit-Supporting-the-Kintex-7-FPGA-Family.aspx

The MMP can be a PCIE device and has a LPC FMC port.

If you do want Ethernet with Zedboard or MicroZed, you can use an FMC style Ethernet card.

Here is one example dual Ethernet FMC card:
http://www.em.avnet.com/en-us/design/drc/Pages/ISM-Networking-FMC-Module.aspx

Keep in mind, the FMC on the MicroZed (with FMC Carrier Board)and Zedboard is LPC (Low Pin Count).

--Dan
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Reply

0 drozwood90 over 11 years ago

Jagan,

The Zedboard and MicroZed do not have transceivers on them. The Mini-ITX:
http://www.em.avnet.com/en-us/design/drc/Pages/Xilinx-Zynq-7000-All-Programmable-SoC-Mini-ITX-Development.aspx

or Mini Module Plus (MMP):
http://www.em.avnet.com/en-us/design/drc/Pages/Xilinx-Zynq-7000-SoC-Mini-Module-Plus-Development-Kit.aspx

has transceivers. You can also look at the ZC706 from Xilinx.

The Mini-ITX has a PCIe Slot.

The MMP requires you to purchase carrier boards so that you get a MMP that suits your needs, as shown on this page:
http://www.em.avnet.com/en-us/design/drc/Pages/Mini-Module-Plus-Development-Kit-Supporting-the-Kintex-7-FPGA-Family.aspx

The MMP can be a PCIE device and has a LPC FMC port.

If you do want Ethernet with Zedboard or MicroZed, you can use an FMC style Ethernet card.

Here is one example dual Ethernet FMC card:
http://www.em.avnet.com/en-us/design/drc/Pages/ISM-Networking-FMC-Module.aspx

Keep in mind, the FMC on the MicroZed (with FMC Carrier Board)and Zedboard is LPC (Low Pin Count).

--Dan
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Children

No Data