Actions
Forum Thread Details
  • State Not Answered
  • Replies 6 replies
  • Subscribers 353 subscribers
  • Views 551 views
  • Users 0 members are here
Related

Ubuntu 12.04 to 14.04

Former Member

Is it possible to upgrade the Xillinux to the ubuntu 14.04, because the version I am using is the ubuntu 12.04.
When I try to upgrade it is show: "No new release found"

It is because I wants to connect my zedboard with a dongle wifi, and it isn't working. The drivers are installed, but it is not working. Can someone help me?

Thanks in advance.

Parents
  • 0

    Dear Eli,

    Here is the log:

    [    1.524745] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
    [    1.528357] console [ttyPS0] enabled, bootconsole disabled
    [    1.534514] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to e0864000
    [    1.556835] brd: module loaded
    [    1.565388] loop: module loaded
    [    1.575562] xqspips e000d000.ps7-qspi: master is unqueued, this is deprecated
    [    1.583082] m25p80 spi0.0: found s25fl256s1, expected n25q128
    [    1.588962] m25p80 spi0.0: s25fl256s1 (32768 Kbytes)
    [    1.593884] 5 ofpart partitions found on MTD device spi0.0
    [    1.599303] Creating 5 MTD partitions on "spi0.0":
    [    1.604169] 0x000000000000-0x000000100000 : "qspi-fsbl-uboot"
    [    1.611155] 0x000000100000-0x000000600000 : "qspi-linux"
    [    1.617587] 0x000000600000-0x000000620000 : "qspi-device-tree"
    [    1.624536] 0x000000620000-0x000000c00000 : "qspi-rootfs"
    [    1.631006] 0x000000c00000-0x000001000000 : "qspi-bitstream"
    [    1.637789] xqspips e000d000.ps7-qspi: at 0xE000D000 mapped to 0xE0866000, irq=51
    [    1.647706] libphy: Fixed MDIO Bus: probed
    [    1.653585] libphy: XEMACPS mii bus: probed
    [    1.658544] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
    [    1.666617] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    1.673216] ehci-pci: EHCI PCI platform driver
    [    1.678192] ULPI transceiver vendor/product ID 0x0451/0x1507
    [    1.683796] Found TI TUSB1210 ULPI transceiver.
    [    1.688293] ULPI integrity check: passed.
    [    1.692533] xusbps-ehci xusbps-ehci.0: Xilinx PS USB EHCI Host Controller
    [    1.699316] xusbps-ehci xusbps-ehci.0: new USB bus registered, assigned bus number 1
    [    1.733673] xusbps-ehci xusbps-ehci.0: irq 53, io mem 0x00000000
    [    1.753654] xusbps-ehci xusbps-ehci.0: USB 2.0 started, EHCI 1.00
    [    1.760566] hub 1-0:1.0: USB hub found
    [    1.764289] hub 1-0:1.0: 1 port detected
    [    1.768786] usbcore: registered new interface driver usb-storage
    [    1.775625] mousedev: PS/2 mouse device common for all mice
    [    1.781689] i2c /dev entries driver
    [    1.785947] IR NEC protocol handler initialized
    [    1.790389] IR RC5(x) protocol handler initialized
    [    1.795200] IR RC6 protocol handler initialized
    [    1.799660] IR JVC protocol handler initialized
    [    1.804232] IR Sony protocol handler initialized
    [    1.808784] IR RC5 (streamzap) protocol handler initialized
    [    1.814351] IR SANYO protocol handler initialized
    [    1.819033] IR MCE Keyboard/mouse protocol handler initialized
    [    1.825742] xadcps f8007100.ps7-xadc: enabled:tyestreference:texternal
    [    1.832765] zynq-edac f8006000.ps7-ddrc: ecc not enabled
    [    1.838349] sdhci: Secure Digital Host Controller Interface driver
    [    1.844469] sdhci: Copyright(c) Pierre Ossman
    [    1.848782] sdhci-pltfm: SDHCI platform and OF driver helper
    [    1.854570] mmc0: no vqmmc regulator found
    [    1.858588] mmc0: no vmmc regulator found
    [    1.862588] mmc0: Invalid maximum block size, assuming 512 bytes
    [    1.903655] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
    [    1.916852] usbcore: registered new interface driver usbhid
    [    1.922363] usbhid: USB HID core driver
    [    1.929073] pmodoled-gpio-spi [zed_oled] SPI Probing
    [    1.987576] mmc0: new high speed SDHC card at address aaaa
    [    1.993364] mmcblk0: mmc0:aaaa SU16G 14.8 GiB
    [    1.999170]  mmcblk0: p1 p2
    [    2.083682] usb 1-1: new high-speed USB device number 2 using xusbps-ehci
    [    2.109487] no UART detected at 0x1
    [    2.114150] TCP: cubic registered
    [    2.117394] NET: Registered protocol family 15
    [    2.121873] Key type dns_resolver registered
    [    2.126334] Registering SWP/SWPB emulation handler
    [    2.131808] registered taskstats version 1
    [    2.136250] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
    [    2.146001] ALSA device list:
    [    2.148894]   No soundcards found.
    [    2.163290] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
    [    2.172045] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
    [    2.195104] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
    [    2.203122] VFS: Mounted root (ext4 filesystem) on device 179:2.
    [    2.214734] devtmpfs: mounted
    [    2.217886] Freeing unused kernel memory: 196K (c0642000 - c0673000)
    [    2.236687] hub 1-1:1.0: USB hub found
    [    2.240742] hub 1-1:1.0: 4 ports detected
    [    2.524007] usb 1-1.3: new high-speed USB device number 3 using xusbps-ehci
    [    2.714154] usb 1-1.4: new low-speed USB device number 4 using xusbps-ehci
    [    2.846773] input: RCMCU 2.4GHz receiver as /devices/amba.0/e0002000.ps7-usb/xusbps-ehci.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input0
    [    2.859122] hid-generic 0003:0C45:7000.0001: input: USB HID v1.11 Keyboard [RCMCU 2.4GHz receiver] on usb-xusbps-ehci.0-1.4/input0
    [    2.878163] input: RCMCU 2.4GHz receiver as /devices/amba.0/e0002000.ps7-usb/xusbps-ehci.0/usb1/1-1/1-1.4/1-1.4:1.1/input/input1
    [    2.890900] hid-generic 0003:0C45:7000.0002: input: USB HID v1.11 Mouse [RCMCU 2.4GHz receiver] on usb-xusbps-ehci.0-1.4/input1
    [    3.348459] udevd[801]: starting version 175
    [    4.084861] lp: driver loaded but no devices found
    [    4.154479] xillybus_core: module is from the staging directory, the quality is unknown, you have been warned.
    [    4.384660] xillybus_of: module is from the staging directory, the quality is unknown, you have been warned.
    [    4.436989] xillybus_of 50000000.xillybus: Malformed message (skipping): opcode=176, channel=030, dir=1, bufno=000, data=0000000
    [    4.437008] xillybus_of 50000000.xillybus: Sending a NACK on counter 0 (instead of b) on entry 0
    [    4.437026] xillybus_of 50000000.xillybus: Malformed message (skipping): opcode=176, channel=030, dir=1, bufno=000, data=0000000
    [    4.437044] xillybus_of 50000000.xillybus: Sending a NACK on counter 0 (instead of b) on entry 0
    [    4.437100] xillybus_of 50000000.xillybus: Malformed message (skipping): opcode=176, channel=030, dir=1, bufno=000, data=0000000
    [    4.437100] xillybus_of 50000000.xillybus: Sending a NACK on counter 0 (instead of b) on entry 0
    [    4.437118] xillybus_of 50000000.xillybus: Malformed message (skipping): opcode=176, channel=030, dir=1, bufno=000, data=0000000
    [    4.437137] xillybus_of 50000000.xillybus: Sending a NACK on counter 0 (instead of b) on entry 0
    [    4.437155] xillybus_of 50000000.xillybus: Malformed message (skipping): opcode=176, channel=030, dir=1, bufno=000, data=0000000
    [    4.437173] xillybus_of 50000000.xillybus: Sending a NACK on counter 0 (instead of b) on entry 0
    [    4.437192] xillybus_of 50000000.xillybus: Malformed message (skipping): opcode=176, channel=030, dir=1, bufno=000, data=0000000
    [    4.437210] xillybus_of 50000000.xillybus: Sending a NACK on counter 0 (instead of b) on entry 0
    [    4.437229] xillybus_of 50000000.xillybus: Malformed message (skipping): opcode=176, channel=030, dir=1, bufno=000, data=0000000
    [    4.437247] xillybus_of 50000000.xillybus: Sending a NACK on counter 0 (instead of b) on entry 0
    [    4.437266] xillybus_of 50000000.xillybus: Malformed message (skipping): opcode=176, channel=030, dir=1, bufno=000, data=0000000
    [    4.437284] xillybus_of 50000000.xillybus: Sending a NACK on counter 0 (instead of b) on entry 0
    [    4.437432] xillybus_of 50000000.xillybus: Malformed message (skipping): opcode=176, channel=030, dir=1, bufno=000, data=0000000
    [    4.437450] xillybus_of 50000000.xillybus: Sending a NACK on counter 0 (instead of b) on entry 0
    [    4.437468] xillybus_of 50000000.xillybus: Malformed message (skipping): opcode=176, channel=030, dir=1, bufno=000, data=0000000
    [    4.437468] xillybus_of 50000000.xillybus: Sending a NACK on counter 0 (instead of b) on entry 0
    [    4.437487] xillybus_of 50000000.xillybus: Malformed message (skipping): opcode=176, channel=030, dir=1, bufno=000, data=0000000
    [    4.437505] xillybus_of 50000000.xillybus: Sending a NACK on counter 0 (instead of b) on entry 0
    [    4.437524] xillybus_of 50000000.xillybus: Lost sync with interrupt messages. Stopping.
    [    4.514238] ppdev: user-space parallel port driver
    [    4.533721] xillybus_of 50000000.xillybus: No response from FPGA. Aborting.
    [    4.677861] NET: Registered protocol family 10
    [    4.897130] ------------[ cut here ]------------
    [    4.897295] WARNING: CPU: 0 PID: 1258 at net/wireless/reg.c:423 regulatory_init+0x90/0x130 [cfg80211]()
    [    4.897295] db.txt is empty, you should update it...
    [    4.897314] Modules linked in: cfg80211(+) rfkill ipv6 xillybus_of(C) xillybus_lite_of ppdev xillybus_core(C) uio_pdrv_genirq lp uio parport
    [    4.897369] CPU: 0 PID: 1258 Comm: modprobe Tainted: G         C   3.12.0-xillinux-1.3 #1
    [    4.897406] [<c00143d8>] (unwind_backtrace+0x0/0xe0) from [<c0010ba8>] (show_stack+0x10/0x14)
    [    4.897443] [<c0010ba8>] (show_stack+0x10/0x14) from [<c045bdd8>] (dump_stack+0x84/0xcc)
    [    4.897461] [<c045bdd8>] (dump_stack+0x84/0xcc) from [<c0020c88>] (warn_slowpath_common+0x60/0x80)
    [    4.897498] [<c0020c88>] (warn_slowpath_common+0x60/0x80) from [<c0020d28>] (warn_slowpath_fmt+0x2c/0x3c)
    [    4.897609] [<c0020d28>] (warn_slowpath_fmt+0x2c/0x3c) from [<bf0d4160>] (regulatory_init+0x90/0x130 [cfg80211])
    [    4.897756] [<bf0d4160>] (regulatory_init+0x90/0x130 [cfg80211]) from [<bf0d4054>] (cfg80211_init+0x54/0xd0 [cfg80211])
    [    4.897848] [<bf0d4054>] (cfg80211_init+0x54/0xd0 [cfg80211]) from [<c000876c>] (do_one_initcall+0x98/0x13c)
    [    4.897885] [<c000876c>] (do_one_initcall+0x98/0x13c) from [<c0069500>] (load_module+0x194c/0x1bf0)
    [    4.897904] [<c0069500>] (load_module+0x194c/0x1bf0) from [<c006986c>] (SyS_init_module+0xc8/0xcc)
    [    4.897922] [<c006986c>] (SyS_init_module+0xc8/0xcc) from [<c000db60>] (ret_fast_syscall+0x0/0x30)
    [    4.897941] ---[ end trace dfe3d6338b56472b ]---
    [    4.897996] cfg80211: Calling CRDA to update world regulatory domain
    [    5.104565] rtl8192cu: Chip version 0x10
    [    5.276666] rtl8192cu: MAC address: e8:4e:06:11:56:d4
    [    5.276703] rtl8192cu: Board Type 0
    [    5.277164] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1
    [    5.277182] cfg80211: Updating information on frequency 2412 MHz with regulatory rule:
    [    5.277201] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [    5.277219] cfg80211: Updating information on frequency 2417 MHz with regulatory rule:
    [    5.277219] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [    5.277238] cfg80211: Updating information on frequency 2422 MHz with regulatory rule:
    [    5.277256] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [    5.277256] cfg80211: Updating information on frequency 2427 MHz with regulatory rule:
    [    5.277274] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [    5.277293] cfg80211: Updating information on frequency 2432 MHz with regulatory rule:
    [    5.277293] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [    5.277311] cfg80211: Updating information on frequency 2437 MHz with regulatory rule:
    [    5.277311] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [    5.277330] cfg80211: Updating information on frequency 2442 MHz with regulatory rule:
    [    5.277348] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [    5.277367] cfg80211: Updating information on frequency 2447 MHz with regulatory rule:
    [    5.277385] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [    5.277385] cfg80211: Updating information on frequency 2452 MHz with regulatory rule:
    [    5.277404] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [    5.277422] cfg80211: Updating information on frequency 2457 MHz with regulatory rule:
    [    5.277422] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [    5.277440] cfg80211: Updating information on frequency 2462 MHz with regulatory rule:
    [    5.277440] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [    5.277459] cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits it
    [    5.277477] cfg80211: Disabling freq 2472 MHz as custom regd has no rule that fits it
    [    5.277477] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits it
    [    5.277569] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw.bin
    [    5.281348] usbcore: registered new interface driver rtl8192cu
    [    5.346856] rtlwifi: Firmware rtlwifi/rtl8192cufw.bin not available
    [    5.455090] cfg80211: World regulatory domain updated:
    [    5.455108] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [    5.455126] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [    5.455126] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [    5.455145] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [    5.455145] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [    5.455163] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [    5.731166] NET: Registered protocol family 17
    [    5.793098] init_stage2: failsafe main process (1308) killed by TERM signal
    [    6.198256] init_stage2: atd main process (1402) terminated with status 1
    [    6.198422] init_stage2: atd main process ended, respawning
    [    8.537205] init_stage2: xillinux-sound main process (804) terminated with status 1



    My problem is how configure the wireless? Can I connect to wireless? How I do that?

    Thanks very much for every help. Apologise, but I am newer in this.

    best regards,
    Eduardo

Reply
  • 0

    Dear Eli,

    Here is the log:

    [    1.524745] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
    [    1.528357] console [ttyPS0] enabled, bootconsole disabled
    [    1.534514] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to e0864000
    [    1.556835] brd: module loaded
    [    1.565388] loop: module loaded
    [    1.575562] xqspips e000d000.ps7-qspi: master is unqueued, this is deprecated
    [    1.583082] m25p80 spi0.0: found s25fl256s1, expected n25q128
    [    1.588962] m25p80 spi0.0: s25fl256s1 (32768 Kbytes)
    [    1.593884] 5 ofpart partitions found on MTD device spi0.0
    [    1.599303] Creating 5 MTD partitions on "spi0.0":
    [    1.604169] 0x000000000000-0x000000100000 : "qspi-fsbl-uboot"
    [    1.611155] 0x000000100000-0x000000600000 : "qspi-linux"
    [    1.617587] 0x000000600000-0x000000620000 : "qspi-device-tree"
    [    1.624536] 0x000000620000-0x000000c00000 : "qspi-rootfs"
    [    1.631006] 0x000000c00000-0x000001000000 : "qspi-bitstream"
    [    1.637789] xqspips e000d000.ps7-qspi: at 0xE000D000 mapped to 0xE0866000, irq=51
    [    1.647706] libphy: Fixed MDIO Bus: probed
    [    1.653585] libphy: XEMACPS mii bus: probed
    [    1.658544] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
    [    1.666617] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    1.673216] ehci-pci: EHCI PCI platform driver
    [    1.678192] ULPI transceiver vendor/product ID 0x0451/0x1507
    [    1.683796] Found TI TUSB1210 ULPI transceiver.
    [    1.688293] ULPI integrity check: passed.
    [    1.692533] xusbps-ehci xusbps-ehci.0: Xilinx PS USB EHCI Host Controller
    [    1.699316] xusbps-ehci xusbps-ehci.0: new USB bus registered, assigned bus number 1
    [    1.733673] xusbps-ehci xusbps-ehci.0: irq 53, io mem 0x00000000
    [    1.753654] xusbps-ehci xusbps-ehci.0: USB 2.0 started, EHCI 1.00
    [    1.760566] hub 1-0:1.0: USB hub found
    [    1.764289] hub 1-0:1.0: 1 port detected
    [    1.768786] usbcore: registered new interface driver usb-storage
    [    1.775625] mousedev: PS/2 mouse device common for all mice
    [    1.781689] i2c /dev entries driver
    [    1.785947] IR NEC protocol handler initialized
    [    1.790389] IR RC5(x) protocol handler initialized
    [    1.795200] IR RC6 protocol handler initialized
    [    1.799660] IR JVC protocol handler initialized
    [    1.804232] IR Sony protocol handler initialized
    [    1.808784] IR RC5 (streamzap) protocol handler initialized
    [    1.814351] IR SANYO protocol handler initialized
    [    1.819033] IR MCE Keyboard/mouse protocol handler initialized
    [    1.825742] xadcps f8007100.ps7-xadc: enabled:tyestreference:texternal
    [    1.832765] zynq-edac f8006000.ps7-ddrc: ecc not enabled
    [    1.838349] sdhci: Secure Digital Host Controller Interface driver
    [    1.844469] sdhci: Copyright(c) Pierre Ossman
    [    1.848782] sdhci-pltfm: SDHCI platform and OF driver helper
    [    1.854570] mmc0: no vqmmc regulator found
    [    1.858588] mmc0: no vmmc regulator found
    [    1.862588] mmc0: Invalid maximum block size, assuming 512 bytes
    [    1.903655] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
    [    1.916852] usbcore: registered new interface driver usbhid
    [    1.922363] usbhid: USB HID core driver
    [    1.929073] pmodoled-gpio-spi [zed_oled] SPI Probing
    [    1.987576] mmc0: new high speed SDHC card at address aaaa
    [    1.993364] mmcblk0: mmc0:aaaa SU16G 14.8 GiB
    [    1.999170]  mmcblk0: p1 p2
    [    2.083682] usb 1-1: new high-speed USB device number 2 using xusbps-ehci
    [    2.109487] no UART detected at 0x1
    [    2.114150] TCP: cubic registered
    [    2.117394] NET: Registered protocol family 15
    [    2.121873] Key type dns_resolver registered
    [    2.126334] Registering SWP/SWPB emulation handler
    [    2.131808] registered taskstats version 1
    [    2.136250] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
    [    2.146001] ALSA device list:
    [    2.148894]   No soundcards found.
    [    2.163290] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
    [    2.172045] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
    [    2.195104] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
    [    2.203122] VFS: Mounted root (ext4 filesystem) on device 179:2.
    [    2.214734] devtmpfs: mounted
    [    2.217886] Freeing unused kernel memory: 196K (c0642000 - c0673000)
    [    2.236687] hub 1-1:1.0: USB hub found
    [    2.240742] hub 1-1:1.0: 4 ports detected
    [    2.524007] usb 1-1.3: new high-speed USB device number 3 using xusbps-ehci
    [    2.714154] usb 1-1.4: new low-speed USB device number 4 using xusbps-ehci
    [    2.846773] input: RCMCU 2.4GHz receiver as /devices/amba.0/e0002000.ps7-usb/xusbps-ehci.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input0
    [    2.859122] hid-generic 0003:0C45:7000.0001: input: USB HID v1.11 Keyboard [RCMCU 2.4GHz receiver] on usb-xusbps-ehci.0-1.4/input0
    [    2.878163] input: RCMCU 2.4GHz receiver as /devices/amba.0/e0002000.ps7-usb/xusbps-ehci.0/usb1/1-1/1-1.4/1-1.4:1.1/input/input1
    [    2.890900] hid-generic 0003:0C45:7000.0002: input: USB HID v1.11 Mouse [RCMCU 2.4GHz receiver] on usb-xusbps-ehci.0-1.4/input1
    [    3.348459] udevd[801]: starting version 175
    [    4.084861] lp: driver loaded but no devices found
    [    4.154479] xillybus_core: module is from the staging directory, the quality is unknown, you have been warned.
    [    4.384660] xillybus_of: module is from the staging directory, the quality is unknown, you have been warned.
    [    4.436989] xillybus_of 50000000.xillybus: Malformed message (skipping): opcode=176, channel=030, dir=1, bufno=000, data=0000000
    [    4.437008] xillybus_of 50000000.xillybus: Sending a NACK on counter 0 (instead of b) on entry 0
    [    4.437026] xillybus_of 50000000.xillybus: Malformed message (skipping): opcode=176, channel=030, dir=1, bufno=000, data=0000000
    [    4.437044] xillybus_of 50000000.xillybus: Sending a NACK on counter 0 (instead of b) on entry 0
    [    4.437100] xillybus_of 50000000.xillybus: Malformed message (skipping): opcode=176, channel=030, dir=1, bufno=000, data=0000000
    [    4.437100] xillybus_of 50000000.xillybus: Sending a NACK on counter 0 (instead of b) on entry 0
    [    4.437118] xillybus_of 50000000.xillybus: Malformed message (skipping): opcode=176, channel=030, dir=1, bufno=000, data=0000000
    [    4.437137] xillybus_of 50000000.xillybus: Sending a NACK on counter 0 (instead of b) on entry 0
    [    4.437155] xillybus_of 50000000.xillybus: Malformed message (skipping): opcode=176, channel=030, dir=1, bufno=000, data=0000000
    [    4.437173] xillybus_of 50000000.xillybus: Sending a NACK on counter 0 (instead of b) on entry 0
    [    4.437192] xillybus_of 50000000.xillybus: Malformed message (skipping): opcode=176, channel=030, dir=1, bufno=000, data=0000000
    [    4.437210] xillybus_of 50000000.xillybus: Sending a NACK on counter 0 (instead of b) on entry 0
    [    4.437229] xillybus_of 50000000.xillybus: Malformed message (skipping): opcode=176, channel=030, dir=1, bufno=000, data=0000000
    [    4.437247] xillybus_of 50000000.xillybus: Sending a NACK on counter 0 (instead of b) on entry 0
    [    4.437266] xillybus_of 50000000.xillybus: Malformed message (skipping): opcode=176, channel=030, dir=1, bufno=000, data=0000000
    [    4.437284] xillybus_of 50000000.xillybus: Sending a NACK on counter 0 (instead of b) on entry 0
    [    4.437432] xillybus_of 50000000.xillybus: Malformed message (skipping): opcode=176, channel=030, dir=1, bufno=000, data=0000000
    [    4.437450] xillybus_of 50000000.xillybus: Sending a NACK on counter 0 (instead of b) on entry 0
    [    4.437468] xillybus_of 50000000.xillybus: Malformed message (skipping): opcode=176, channel=030, dir=1, bufno=000, data=0000000
    [    4.437468] xillybus_of 50000000.xillybus: Sending a NACK on counter 0 (instead of b) on entry 0
    [    4.437487] xillybus_of 50000000.xillybus: Malformed message (skipping): opcode=176, channel=030, dir=1, bufno=000, data=0000000
    [    4.437505] xillybus_of 50000000.xillybus: Sending a NACK on counter 0 (instead of b) on entry 0
    [    4.437524] xillybus_of 50000000.xillybus: Lost sync with interrupt messages. Stopping.
    [    4.514238] ppdev: user-space parallel port driver
    [    4.533721] xillybus_of 50000000.xillybus: No response from FPGA. Aborting.
    [    4.677861] NET: Registered protocol family 10
    [    4.897130] ------------[ cut here ]------------
    [    4.897295] WARNING: CPU: 0 PID: 1258 at net/wireless/reg.c:423 regulatory_init+0x90/0x130 [cfg80211]()
    [    4.897295] db.txt is empty, you should update it...
    [    4.897314] Modules linked in: cfg80211(+) rfkill ipv6 xillybus_of(C) xillybus_lite_of ppdev xillybus_core(C) uio_pdrv_genirq lp uio parport
    [    4.897369] CPU: 0 PID: 1258 Comm: modprobe Tainted: G         C   3.12.0-xillinux-1.3 #1
    [    4.897406] [<c00143d8>] (unwind_backtrace+0x0/0xe0) from [<c0010ba8>] (show_stack+0x10/0x14)
    [    4.897443] [<c0010ba8>] (show_stack+0x10/0x14) from [<c045bdd8>] (dump_stack+0x84/0xcc)
    [    4.897461] [<c045bdd8>] (dump_stack+0x84/0xcc) from [<c0020c88>] (warn_slowpath_common+0x60/0x80)
    [    4.897498] [<c0020c88>] (warn_slowpath_common+0x60/0x80) from [<c0020d28>] (warn_slowpath_fmt+0x2c/0x3c)
    [    4.897609] [<c0020d28>] (warn_slowpath_fmt+0x2c/0x3c) from [<bf0d4160>] (regulatory_init+0x90/0x130 [cfg80211])
    [    4.897756] [<bf0d4160>] (regulatory_init+0x90/0x130 [cfg80211]) from [<bf0d4054>] (cfg80211_init+0x54/0xd0 [cfg80211])
    [    4.897848] [<bf0d4054>] (cfg80211_init+0x54/0xd0 [cfg80211]) from [<c000876c>] (do_one_initcall+0x98/0x13c)
    [    4.897885] [<c000876c>] (do_one_initcall+0x98/0x13c) from [<c0069500>] (load_module+0x194c/0x1bf0)
    [    4.897904] [<c0069500>] (load_module+0x194c/0x1bf0) from [<c006986c>] (SyS_init_module+0xc8/0xcc)
    [    4.897922] [<c006986c>] (SyS_init_module+0xc8/0xcc) from [<c000db60>] (ret_fast_syscall+0x0/0x30)
    [    4.897941] ---[ end trace dfe3d6338b56472b ]---
    [    4.897996] cfg80211: Calling CRDA to update world regulatory domain
    [    5.104565] rtl8192cu: Chip version 0x10
    [    5.276666] rtl8192cu: MAC address: e8:4e:06:11:56:d4
    [    5.276703] rtl8192cu: Board Type 0
    [    5.277164] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1
    [    5.277182] cfg80211: Updating information on frequency 2412 MHz with regulatory rule:
    [    5.277201] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [    5.277219] cfg80211: Updating information on frequency 2417 MHz with regulatory rule:
    [    5.277219] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [    5.277238] cfg80211: Updating information on frequency 2422 MHz with regulatory rule:
    [    5.277256] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [    5.277256] cfg80211: Updating information on frequency 2427 MHz with regulatory rule:
    [    5.277274] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [    5.277293] cfg80211: Updating information on frequency 2432 MHz with regulatory rule:
    [    5.277293] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [    5.277311] cfg80211: Updating information on frequency 2437 MHz with regulatory rule:
    [    5.277311] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [    5.277330] cfg80211: Updating information on frequency 2442 MHz with regulatory rule:
    [    5.277348] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [    5.277367] cfg80211: Updating information on frequency 2447 MHz with regulatory rule:
    [    5.277385] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [    5.277385] cfg80211: Updating information on frequency 2452 MHz with regulatory rule:
    [    5.277404] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [    5.277422] cfg80211: Updating information on frequency 2457 MHz with regulatory rule:
    [    5.277422] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [    5.277440] cfg80211: Updating information on frequency 2462 MHz with regulatory rule:
    [    5.277440] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [    5.277459] cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits it
    [    5.277477] cfg80211: Disabling freq 2472 MHz as custom regd has no rule that fits it
    [    5.277477] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits it
    [    5.277569] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw.bin
    [    5.281348] usbcore: registered new interface driver rtl8192cu
    [    5.346856] rtlwifi: Firmware rtlwifi/rtl8192cufw.bin not available
    [    5.455090] cfg80211: World regulatory domain updated:
    [    5.455108] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [    5.455126] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [    5.455126] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [    5.455145] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [    5.455145] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [    5.455163] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [    5.731166] NET: Registered protocol family 17
    [    5.793098] init_stage2: failsafe main process (1308) killed by TERM signal
    [    6.198256] init_stage2: atd main process (1402) terminated with status 1
    [    6.198422] init_stage2: atd main process ended, respawning
    [    8.537205] init_stage2: xillinux-sound main process (804) terminated with status 1



    My problem is how configure the wireless? Can I connect to wireless? How I do that?

    Thanks very much for every help. Apologise, but I am newer in this.

    best regards,
    Eduardo

Children
No Data