Ubuntu 12.04 to 14.04

Is it possible to upgrade the Xillinux to the ubuntu 14.04, because the version I am using is the ubuntu 12.04.
When I try to upgrade it is show: "No new release found"

It is because I wants to connect my zedboard with a dongle wifi, and it isn't working. The drivers are installed, but it is not working. Can someone help me?

Thanks in advance.

Parents

0 Former Member over 10 years ago

It is working the dongle, here is the log:

[    4.902641] xillybus_of 50000000.xillybus: Malformed message (skipping): opcode=176, channel=030, dir=1, bufno=000, data=0050000
[    4.902641] xillybus_of 50000000.xillybus: Sending a NACK on counter 0 (instead of b) on entry 0
[    4.902659] xillybus_of 50000000.xillybus: Malformed message (skipping): opcode=176, channel=030, dir=1, bufno=000, data=0050000
[    4.902659] xillybus_of 50000000.xillybus: Sending a NACK on counter 0 (instead of b) on entry 0
[    4.902678] xillybus_of 50000000.xillybus: Malformed message (skipping): opcode=176, channel=030, dir=1, bufno=000, data=0050000
[    4.902678] xillybus_of 50000000.xillybus: Sending a NACK on counter 0 (instead of b) on entry 0
[    4.902696] xillybus_of 50000000.xillybus: Malformed message (skipping): opcode=176, channel=030, dir=1, bufno=000, data=0050000
[    4.902696] xillybus_of 50000000.xillybus: Sending a NACK on counter 0 (instead of b) on entry 0
[    4.902715] xillybus_of 50000000.xillybus: Malformed message (skipping): opcode=176, channel=030, dir=1, bufno=000, data=0050000
[    4.902733] xillybus_of 50000000.xillybus: Sending a NACK on counter 0 (instead of b) on entry 0
[    4.902733] xillybus_of 50000000.xillybus: Malformed message (skipping): opcode=176, channel=030, dir=1, bufno=000, data=0050000
[    4.902751] xillybus_of 50000000.xillybus: Sending a NACK on counter 0 (instead of b) on entry 0
[    4.902751] xillybus_of 50000000.xillybus: Lost sync with interrupt messages. Stopping.
[    4.994286] xillybus_of 50000000.xillybus: No response from FPGA. Aborting.
[    5.417967] NET: Registered protocol family 10
[    5.466610] ------------[ cut here ]------------
[    5.466776] WARNING: CPU: 1 PID: 1239 at net/wireless/reg.c:423 regulatory_init+0x90/0x130 [cfg80211]()
[    5.466776] db.txt is empty, you should update it...
[    5.466776] Modules linked in: cfg80211(+) rfkill ipv6 xillybus_of(C) xillybus_core(C) xillybus_lite_of ppdev uio_pdrv_genirq uio lp parport
[    5.466831] CPU: 1 PID: 1239 Comm: modprobe Tainted: G         C   3.12.0-xillinux-1.3 #1
[    5.466886] [<c00143d8>] (unwind_backtrace+0x0/0xe0) from [<c0010ba8>] (show_stack+0x10/0x14)
[    5.466923] [<c0010ba8>] (show_stack+0x10/0x14) from [<c045bdd8>] (dump_stack+0x84/0xcc)
[    5.466960] [<c045bdd8>] (dump_stack+0x84/0xcc) from [<c0020c88>] (warn_slowpath_common+0x60/0x80)
[    5.466978] [<c0020c88>] (warn_slowpath_common+0x60/0x80) from [<c0020d28>] (warn_slowpath_fmt+0x2c/0x3c)
[    5.467089] [<c0020d28>] (warn_slowpath_fmt+0x2c/0x3c) from [<bf0d4160>] (regulatory_init+0x90/0x130 [cfg80211])
[    5.467236] [<bf0d4160>] (regulatory_init+0x90/0x130 [cfg80211]) from [<bf0d4054>] (cfg80211_init+0x54/0xd0 [cfg80211])
[    5.467328] [<bf0d4054>] (cfg80211_init+0x54/0xd0 [cfg80211]) from [<c000876c>] (do_one_initcall+0x98/0x13c)
[    5.467365] [<c000876c>] (do_one_initcall+0x98/0x13c) from [<c0069500>] (load_module+0x194c/0x1bf0)
[    5.467384] [<c0069500>] (load_module+0x194c/0x1bf0) from [<c006986c>] (SyS_init_module+0xc8/0xcc)
[    5.467402] [<c006986c>] (SyS_init_module+0xc8/0xcc) from [<c000db60>] (ret_fast_syscall+0x0/0x30)
[    5.467421] ---[ end trace dc1d1dacce24acb7 ]---
[    5.467476] cfg80211: Calling CRDA to update world regulatory domain
[    5.654728] rtl8192cu: Chip version 0x10
[    5.804711] rtl8192cu: MAC address: e8:4e:06:11:56:d4
[    5.804748] rtl8192cu: Board Type 0
[    5.805337] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1
[    5.805374] cfg80211: Updating information on frequency 2412 MHz with regulatory rule:
[    5.805374] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    5.805393] cfg80211: Updating information on frequency 2417 MHz with regulatory rule:
[    5.805411] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    5.805411] cfg80211: Updating information on frequency 2422 MHz with regulatory rule:
[    5.805430] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    5.805430] cfg80211: Updating information on frequency 2427 MHz with regulatory rule:
[    5.805448] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    5.805448] cfg80211: Updating information on frequency 2432 MHz with regulatory rule:
[    5.805466] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    5.805466] cfg80211: Updating information on frequency 2437 MHz with regulatory rule:
[    5.805485] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    5.805485] cfg80211: Updating information on frequency 2442 MHz with regulatory rule:
[    5.805503] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    5.805522] cfg80211: Updating information on frequency 2447 MHz with regulatory rule:
[    5.805522] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    5.805540] cfg80211: Updating information on frequency 2452 MHz with regulatory rule:
[    5.805540] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    5.805559] cfg80211: Updating information on frequency 2457 MHz with regulatory rule:
[    5.805559] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    5.805577] cfg80211: Updating information on frequency 2462 MHz with regulatory rule:
[    5.805577] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    5.805596] cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits it
[    5.805596] cfg80211: Disabling freq 2472 MHz as custom regd has no rule that fits it
[    5.805614] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits it
[    5.806830] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw.bin
[    5.811678] usbcore: registered new interface driver rtl8192cu
[    5.838921] cfg80211: World regulatory domain updated:
[    5.838958] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    5.838958] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    5.838976] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    5.838995] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    5.838995] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    5.839013] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    5.866772] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[    6.034302] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[    6.082336] rtlwifi: wireless switch is on
[    6.221443] rtl8192cu: MAC auto ON okay!
[    6.272353] rtl8192cu: Tx queue select: 0x05
[    6.276353] init_stage2: failsafe main process (1288) killed by TERM signal
[    6.803236] init_stage2: atd main process (1393) terminated with status 1
[    6.803365] init_stage2: atd main process ended, respawning
[    6.815991] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    7.056973] NET: Registered protocol family 17
[    9.026136] init_stage2: xillinux-sound main process (806) terminated with status 1
[    9.447127] wlan0: authenticate with 00:26:5b:8f:07:49
[    9.476784] wlan0: send auth to 00:26:5b:8f:07:49 (try 1/3)
[    9.490295] wlan0: authenticated
[    9.494368] wlan0: associate with 00:26:5b:8f:07:49 (try 1/3)
[    9.508930] wlan0: RX AssocResp from 00:26:5b:8f:07:49 (capab=0xc21 status=0 aid=2)
[    9.509114] wlan0: associated
[    9.510662] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   55.231931] wlan0: deauthenticating from 00:26:5b:8f:07:49 by local choice (reason=3)
[   55.277182] cfg80211: All devices are disconnected, going to restore regulatory settings
[   55.277201] cfg80211: Restoring regulatory settings
[   55.277219] cfg80211: Kicking the queue
[   55.277238] cfg80211: Calling CRDA to update world regulatory domain
[   55.319982] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[   55.320000] cfg80211: World regulatory domain updated:
[   55.320019] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   55.320037] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   55.320037] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   55.320055] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   55.320055] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   55.320074] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   58.472545] wlan0: authenticate with 00:26:5b:f7:b2:d9
[   58.531214] wlan0: direct probe to 00:26:5b:f7:b2:d9 (try 1/3)
[   58.734281] wlan0: send auth to 00:26:5b:f7:b2:d9 (try 2/3)
[   58.736088] wlan0: authenticated
[   58.744364] wlan0: associate with 00:26:5b:f7:b2:d9 (try 1/3)
[   58.757064] wlan0: RX AssocResp from 00:26:5b:f7:b2:d9 (capab=0xc21 status=0 aid=1)
[   58.757285] wlan0: associated
[ 104.228374] wlan0: deauthenticating from 00:26:5b:f7:b2:d9 by local choice (reason=3)
[ 104.254732] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 104.254750] cfg80211: Restoring regulatory settings
[ 104.254769] cfg80211: Kicking the queue
[ 104.254787] cfg80211: Calling CRDA to update world regulatory domain
[ 104.286103] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 104.286122] cfg80211: World regulatory domain updated:
[ 104.286122] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 104.286140] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 104.286159] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 104.286159] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 104.286177] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 104.286177] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 108.007686] wlan0: authenticate with 00:26:5b:f7:b2:d9
[ 108.068217] wlan0: send auth to 00:26:5b:f7:b2:d9 (try 1/3)
[ 108.090206] wlan0: authenticated
[ 108.094335] wlan0: associate with 00:26:5b:f7:b2:d9 (try 1/3)
[ 108.109339] wlan0: RX AssocResp from 00:26:5b:f7:b2:d9 (capab=0xc21 status=0 aid=1)
[ 108.109505] wlan0: associated
[ 153.226752] wlan0: deauthenticating from 00:26:5b:f7:b2:d9 by local choice (reason=3)
[ 153.246235] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 153.246253] cfg80211: Restoring regulatory settings
[ 153.246271] cfg80211: Kicking the queue
[ 153.246290] cfg80211: Calling CRDA to update world regulatory domain
[ 153.281385] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 153.281403] cfg80211: World regulatory domain updated:
[ 153.281403] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 153.281422] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 153.281440] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 153.281440] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 153.281458] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 153.281458] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 157.066097] wlan0: authenticate with bc:14:01:a1:bb:d9
[ 157.115624] wlan0: send auth to bc:14:01:a1:bb:d9 (try 1/3)
[ 157.117707] wlan0: authenticated
[ 157.124416] wlan0: associate with bc:14:01:a1:bb:d9 (try 1/3)
[ 157.153926] wlan0: RX AssocResp from bc:14:01:a1:bb:d9 (capab=0xc21 status=0 aid=2)
[ 157.154092] wlan0: associated
[ 202.235581] wlan0: deauthenticating from bc:14:01:a1:bb:d9 by local choice (reason=3)
[ 202.278896] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 202.278933] cfg80211: Restoring regulatory settings
[ 202.278952] cfg80211: Kicking the queue
[ 202.278952] cfg80211: Calling CRDA to update world regulatory domain
[ 202.328811] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 202.328829] cfg80211: World regulatory domain updated:
[ 202.328829] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 202.328848] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 202.328866] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 202.328866] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 202.328884] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 202.328884] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 502.966582] wlan0: authenticate with 00:26:5b:f7:b2:d9
[ 502.991686] wlan0: send auth to 00:26:5b:f7:b2:d9 (try 1/3)
[ 502.994230] wlan0: authenticated
[ 503.004275] wlan0: associate with 00:26:5b:f7:b2:d9 (try 1/3)
[ 503.056844] wlan0: RX AssocResp from 00:26:5b:f7:b2:d9 (capab=0xc21 status=0 aid=1)
[ 503.057047] wlan0: associated
[ 971.724604] usb 1-1.2: new high-speed USB device number 5 using xusbps-ehci
[ 971.841040] usb-storage 1-1.2:1.0: USB Mass Storage device detected
[ 971.841243] scsi0 : usb-storage 1-1.2:1.0
[ 972.834939] scsi 0:0:0:0: Direct-Access              USB Flash Disk   5.00 PQ: 0 ANSI: 2
[ 972.836911] sd 0:0:0:0: [sda] 3889152 512-byte logical blocks: (1.99 GB/1.85 GiB)
[ 972.837059] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 972.837519] sd 0:0:0:0: [sda] Write Protect is off
[ 972.837538] sd 0:0:0:0: [sda] Mode Sense: 0b 00 00 08
[ 972.838164] sd 0:0:0:0: [sda] No Caching mode page found
[ 972.847989] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 972.861131] sd 0:0:0:0: [sda] No Caching mode page found
[ 972.866403] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 972.873149] sda: sda1
[ 972.877886] sd 0:0:0:0: [sda] No Caching mode page found
[ 972.883120] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 972.890309] sd 0:0:0:0: [sda] Attached SCSI removable disk

I don't know why Xillybs IP core is wrong, can you help me with that?

Thanks for all support and help.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Reply

0 Former Member over 10 years ago

It is working the dongle, here is the log:

[    4.902641] xillybus_of 50000000.xillybus: Malformed message (skipping): opcode=176, channel=030, dir=1, bufno=000, data=0050000
[    4.902641] xillybus_of 50000000.xillybus: Sending a NACK on counter 0 (instead of b) on entry 0
[    4.902659] xillybus_of 50000000.xillybus: Malformed message (skipping): opcode=176, channel=030, dir=1, bufno=000, data=0050000
[    4.902659] xillybus_of 50000000.xillybus: Sending a NACK on counter 0 (instead of b) on entry 0
[    4.902678] xillybus_of 50000000.xillybus: Malformed message (skipping): opcode=176, channel=030, dir=1, bufno=000, data=0050000
[    4.902678] xillybus_of 50000000.xillybus: Sending a NACK on counter 0 (instead of b) on entry 0
[    4.902696] xillybus_of 50000000.xillybus: Malformed message (skipping): opcode=176, channel=030, dir=1, bufno=000, data=0050000
[    4.902696] xillybus_of 50000000.xillybus: Sending a NACK on counter 0 (instead of b) on entry 0
[    4.902715] xillybus_of 50000000.xillybus: Malformed message (skipping): opcode=176, channel=030, dir=1, bufno=000, data=0050000
[    4.902733] xillybus_of 50000000.xillybus: Sending a NACK on counter 0 (instead of b) on entry 0
[    4.902733] xillybus_of 50000000.xillybus: Malformed message (skipping): opcode=176, channel=030, dir=1, bufno=000, data=0050000
[    4.902751] xillybus_of 50000000.xillybus: Sending a NACK on counter 0 (instead of b) on entry 0
[    4.902751] xillybus_of 50000000.xillybus: Lost sync with interrupt messages. Stopping.
[    4.994286] xillybus_of 50000000.xillybus: No response from FPGA. Aborting.
[    5.417967] NET: Registered protocol family 10
[    5.466610] ------------[ cut here ]------------
[    5.466776] WARNING: CPU: 1 PID: 1239 at net/wireless/reg.c:423 regulatory_init+0x90/0x130 [cfg80211]()
[    5.466776] db.txt is empty, you should update it...
[    5.466776] Modules linked in: cfg80211(+) rfkill ipv6 xillybus_of(C) xillybus_core(C) xillybus_lite_of ppdev uio_pdrv_genirq uio lp parport
[    5.466831] CPU: 1 PID: 1239 Comm: modprobe Tainted: G         C   3.12.0-xillinux-1.3 #1
[    5.466886] [<c00143d8>] (unwind_backtrace+0x0/0xe0) from [<c0010ba8>] (show_stack+0x10/0x14)
[    5.466923] [<c0010ba8>] (show_stack+0x10/0x14) from [<c045bdd8>] (dump_stack+0x84/0xcc)
[    5.466960] [<c045bdd8>] (dump_stack+0x84/0xcc) from [<c0020c88>] (warn_slowpath_common+0x60/0x80)
[    5.466978] [<c0020c88>] (warn_slowpath_common+0x60/0x80) from [<c0020d28>] (warn_slowpath_fmt+0x2c/0x3c)
[    5.467089] [<c0020d28>] (warn_slowpath_fmt+0x2c/0x3c) from [<bf0d4160>] (regulatory_init+0x90/0x130 [cfg80211])
[    5.467236] [<bf0d4160>] (regulatory_init+0x90/0x130 [cfg80211]) from [<bf0d4054>] (cfg80211_init+0x54/0xd0 [cfg80211])
[    5.467328] [<bf0d4054>] (cfg80211_init+0x54/0xd0 [cfg80211]) from [<c000876c>] (do_one_initcall+0x98/0x13c)
[    5.467365] [<c000876c>] (do_one_initcall+0x98/0x13c) from [<c0069500>] (load_module+0x194c/0x1bf0)
[    5.467384] [<c0069500>] (load_module+0x194c/0x1bf0) from [<c006986c>] (SyS_init_module+0xc8/0xcc)
[    5.467402] [<c006986c>] (SyS_init_module+0xc8/0xcc) from [<c000db60>] (ret_fast_syscall+0x0/0x30)
[    5.467421] ---[ end trace dc1d1dacce24acb7 ]---
[    5.467476] cfg80211: Calling CRDA to update world regulatory domain
[    5.654728] rtl8192cu: Chip version 0x10
[    5.804711] rtl8192cu: MAC address: e8:4e:06:11:56:d4
[    5.804748] rtl8192cu: Board Type 0
[    5.805337] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1
[    5.805374] cfg80211: Updating information on frequency 2412 MHz with regulatory rule:
[    5.805374] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    5.805393] cfg80211: Updating information on frequency 2417 MHz with regulatory rule:
[    5.805411] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    5.805411] cfg80211: Updating information on frequency 2422 MHz with regulatory rule:
[    5.805430] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    5.805430] cfg80211: Updating information on frequency 2427 MHz with regulatory rule:
[    5.805448] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    5.805448] cfg80211: Updating information on frequency 2432 MHz with regulatory rule:
[    5.805466] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    5.805466] cfg80211: Updating information on frequency 2437 MHz with regulatory rule:
[    5.805485] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    5.805485] cfg80211: Updating information on frequency 2442 MHz with regulatory rule:
[    5.805503] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    5.805522] cfg80211: Updating information on frequency 2447 MHz with regulatory rule:
[    5.805522] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    5.805540] cfg80211: Updating information on frequency 2452 MHz with regulatory rule:
[    5.805540] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    5.805559] cfg80211: Updating information on frequency 2457 MHz with regulatory rule:
[    5.805559] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    5.805577] cfg80211: Updating information on frequency 2462 MHz with regulatory rule:
[    5.805577] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    5.805596] cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits it
[    5.805596] cfg80211: Disabling freq 2472 MHz as custom regd has no rule that fits it
[    5.805614] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits it
[    5.806830] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw.bin
[    5.811678] usbcore: registered new interface driver rtl8192cu
[    5.838921] cfg80211: World regulatory domain updated:
[    5.838958] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    5.838958] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    5.838976] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    5.838995] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    5.838995] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    5.839013] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    5.866772] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[    6.034302] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[    6.082336] rtlwifi: wireless switch is on
[    6.221443] rtl8192cu: MAC auto ON okay!
[    6.272353] rtl8192cu: Tx queue select: 0x05
[    6.276353] init_stage2: failsafe main process (1288) killed by TERM signal
[    6.803236] init_stage2: atd main process (1393) terminated with status 1
[    6.803365] init_stage2: atd main process ended, respawning
[    6.815991] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    7.056973] NET: Registered protocol family 17
[    9.026136] init_stage2: xillinux-sound main process (806) terminated with status 1
[    9.447127] wlan0: authenticate with 00:26:5b:8f:07:49
[    9.476784] wlan0: send auth to 00:26:5b:8f:07:49 (try 1/3)
[    9.490295] wlan0: authenticated
[    9.494368] wlan0: associate with 00:26:5b:8f:07:49 (try 1/3)
[    9.508930] wlan0: RX AssocResp from 00:26:5b:8f:07:49 (capab=0xc21 status=0 aid=2)
[    9.509114] wlan0: associated
[    9.510662] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   55.231931] wlan0: deauthenticating from 00:26:5b:8f:07:49 by local choice (reason=3)
[   55.277182] cfg80211: All devices are disconnected, going to restore regulatory settings
[   55.277201] cfg80211: Restoring regulatory settings
[   55.277219] cfg80211: Kicking the queue
[   55.277238] cfg80211: Calling CRDA to update world regulatory domain
[   55.319982] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[   55.320000] cfg80211: World regulatory domain updated:
[   55.320019] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   55.320037] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   55.320037] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   55.320055] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   55.320055] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   55.320074] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   58.472545] wlan0: authenticate with 00:26:5b:f7:b2:d9
[   58.531214] wlan0: direct probe to 00:26:5b:f7:b2:d9 (try 1/3)
[   58.734281] wlan0: send auth to 00:26:5b:f7:b2:d9 (try 2/3)
[   58.736088] wlan0: authenticated
[   58.744364] wlan0: associate with 00:26:5b:f7:b2:d9 (try 1/3)
[   58.757064] wlan0: RX AssocResp from 00:26:5b:f7:b2:d9 (capab=0xc21 status=0 aid=1)
[   58.757285] wlan0: associated
[ 104.228374] wlan0: deauthenticating from 00:26:5b:f7:b2:d9 by local choice (reason=3)
[ 104.254732] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 104.254750] cfg80211: Restoring regulatory settings
[ 104.254769] cfg80211: Kicking the queue
[ 104.254787] cfg80211: Calling CRDA to update world regulatory domain
[ 104.286103] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 104.286122] cfg80211: World regulatory domain updated:
[ 104.286122] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 104.286140] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 104.286159] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 104.286159] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 104.286177] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 104.286177] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 108.007686] wlan0: authenticate with 00:26:5b:f7:b2:d9
[ 108.068217] wlan0: send auth to 00:26:5b:f7:b2:d9 (try 1/3)
[ 108.090206] wlan0: authenticated
[ 108.094335] wlan0: associate with 00:26:5b:f7:b2:d9 (try 1/3)
[ 108.109339] wlan0: RX AssocResp from 00:26:5b:f7:b2:d9 (capab=0xc21 status=0 aid=1)
[ 108.109505] wlan0: associated
[ 153.226752] wlan0: deauthenticating from 00:26:5b:f7:b2:d9 by local choice (reason=3)
[ 153.246235] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 153.246253] cfg80211: Restoring regulatory settings
[ 153.246271] cfg80211: Kicking the queue
[ 153.246290] cfg80211: Calling CRDA to update world regulatory domain
[ 153.281385] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 153.281403] cfg80211: World regulatory domain updated:
[ 153.281403] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 153.281422] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 153.281440] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 153.281440] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 153.281458] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 153.281458] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 157.066097] wlan0: authenticate with bc:14:01:a1:bb:d9
[ 157.115624] wlan0: send auth to bc:14:01:a1:bb:d9 (try 1/3)
[ 157.117707] wlan0: authenticated
[ 157.124416] wlan0: associate with bc:14:01:a1:bb:d9 (try 1/3)
[ 157.153926] wlan0: RX AssocResp from bc:14:01:a1:bb:d9 (capab=0xc21 status=0 aid=2)
[ 157.154092] wlan0: associated
[ 202.235581] wlan0: deauthenticating from bc:14:01:a1:bb:d9 by local choice (reason=3)
[ 202.278896] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 202.278933] cfg80211: Restoring regulatory settings
[ 202.278952] cfg80211: Kicking the queue
[ 202.278952] cfg80211: Calling CRDA to update world regulatory domain
[ 202.328811] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 202.328829] cfg80211: World regulatory domain updated:
[ 202.328829] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 202.328848] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 202.328866] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 202.328866] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 202.328884] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 202.328884] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 502.966582] wlan0: authenticate with 00:26:5b:f7:b2:d9
[ 502.991686] wlan0: send auth to 00:26:5b:f7:b2:d9 (try 1/3)
[ 502.994230] wlan0: authenticated
[ 503.004275] wlan0: associate with 00:26:5b:f7:b2:d9 (try 1/3)
[ 503.056844] wlan0: RX AssocResp from 00:26:5b:f7:b2:d9 (capab=0xc21 status=0 aid=1)
[ 503.057047] wlan0: associated
[ 971.724604] usb 1-1.2: new high-speed USB device number 5 using xusbps-ehci
[ 971.841040] usb-storage 1-1.2:1.0: USB Mass Storage device detected
[ 971.841243] scsi0 : usb-storage 1-1.2:1.0
[ 972.834939] scsi 0:0:0:0: Direct-Access              USB Flash Disk   5.00 PQ: 0 ANSI: 2
[ 972.836911] sd 0:0:0:0: [sda] 3889152 512-byte logical blocks: (1.99 GB/1.85 GiB)
[ 972.837059] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 972.837519] sd 0:0:0:0: [sda] Write Protect is off
[ 972.837538] sd 0:0:0:0: [sda] Mode Sense: 0b 00 00 08
[ 972.838164] sd 0:0:0:0: [sda] No Caching mode page found
[ 972.847989] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 972.861131] sd 0:0:0:0: [sda] No Caching mode page found
[ 972.866403] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 972.873149] sda: sda1
[ 972.877886] sd 0:0:0:0: [sda] No Caching mode page found
[ 972.883120] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 972.890309] sd 0:0:0:0: [sda] Attached SCSI removable disk

I don't know why Xillybs IP core is wrong, can you help me with that?

Thanks for all support and help.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Children

No Data