BeagleBone Black Wireless Tank Robot

Question

Hi Everyone, I'm looking for suggestions from the community for a project I'm working on. I need a user friendly software solution for a BeagleBone Black Wireless Robotics platform and I also need suggestions for a h bridge motor driver with dual motor output pins that can drive my DFRobot Devastator Robot Chassis and work with the chosen software. It's the same chassis featured in this Pi Devastator Robot video from Explaining Computers on YouTube.

You don't have permission to edit metadata of this video.

Edit media 
 
 
 
 
 
 Dimensions 
 
 
 
 x 
 
 
 
 
 Small 
 Medium 
 Large 
 Custom 
 
 
 
 
 Subject (required) 
 
 
 Brief Description 
 
 
 Tags (separated by comma) 
 
 
 Video visibility in search results 
 
 Visible 
 Hidden 
 
 
 
 Parent content 
 
 
 BeagleBone Black Wireless Tank Robot 
 
 
 
 
 
 
 
 
 Poster 
 
 
 
 Upload 
 Preview 
 
 
 
 
 
 
 
 
 
 
 
 
 Ok 
 
 
 
 
 
 Cancel

Thanks for your time and participation in this discussion. Trent

silver2row · Accepted Answer

Hello, BeagleBone.org has released some new Capes from GHI. They have a MotorCape, too. You can control four motors and there is a positive (vdd_5v) screw terminal for battery use and a GND. Anyway, I set up something a while back on motors and Flask, Python, HTML, and Bootstrap. It works w/ the motors and can be controlled via web page online. I have not gotten around to performing this idea w/ a controller but I will in time. Seth P.S. Here is the link: https://beagleboard.org/capes . There, on that page link, you can find the MotorCape.

fmilburn · Answer

I have used the Pololu motor drivers on two separate occasions with success. Most recently with the TI-RSLK which was RoadTested here on e14. They offer a range of models with different capabilities and are well documented in my experience.

shabaz · Answer

Hi Trent, Interesting robot! There's a nice Infineon motor controller board Infineon motor controller board that is configurable (can have connections paralleled for more power). It is an Arduino shield, so would need jumper wiring to a BBB. I've not used the board, but it looks like it might meet your needs. The user manual is here .

ninjatrent · Answer

There has been an interesting development in my search. I found a TI h bridge from an unfinished project and a Fritzing diagram that shows the same h bridge connected to a BeagleBone. This diagram is provided with a tutorial on the Beagleboard site for using the SwiftyBone OS (I don't have a clue about the Swift language...ugh). This h bridge was purchased from Adafruit for around $3US. I'm feeling a bit foolish. I've completely forgotten an important detail from the BeagleBone Blue Road Test. The Blue's design was inspired from the BB Roboticscape and this BeagleBone Cape is still available for purchase from E14. It's a bit pricey at around $50US but it is a Beagle Cape and it has software support with libroboticscape(this name might have been changed to something else) Trent

ninjatrent · Answer

I went with the Robotics Cape. It should arrive in a few days. Thanks for the suggestion.

BeagleBone Black Wireless Tank Robot

Top Replies