Actions
Forum Thread Details
  • Replies 2 replies
  • Subscribers 161 subscribers
  • Views 217 views
  • Users 0 members are here
Related

RATSNEST

autodeskguest

 

Parents

  • On 12.2.2010 23:08, Christian Bohrer wrote:

    "John Bachman"<john.bachman@anatekcorp.com>  a écrit dans le message de

    news: hl407t$ga9$1@cheetah.cadsoft.de...

    >> What is the command to display only one signal?  I thought that it was

    >> RATSNEST VDD for instance but that does not work.

    >

    Of course that works, but you have to clear all signals before.

    >

    Clear one signal: RATS ! VDD;

    Clear all signal: RATS ! *;

    Display one signal: RATS VDD;

    Display all signal: RATS *;

    >

    >

    I am using eagle 4.13 pro. After I have run rastnest I would like to

    continue my manual routing. This is easier when the pour is not shown.

    As it is now the only way I know how to get the pour to not be shown is

    to change the outline of the pour. Tried the RATS ! *; command but the

    display flickers and all is as before. The ratsnested area is still shown.

     

    Is there any way to do this?

     

    Br,

     

    Bertil Bäck

     

     

  • in reply to Former Member

    On 12.08.10 12:32 PM, Bertil Bäck wrote:

    On 12.2.2010 23:08, Christian Bohrer wrote:

    >> "John Bachman"<john.bachman@anatekcorp.com> a écrit dans le message de

    >> news: hl407t$ga9$1@cheetah.cadsoft.de...

    >>> What is the command to display only one signal? I thought that it was

    >>> RATSNEST VDD for instance but that does not work.

    >>

    >> Of course that works, but you have to clear all signals before.

    >>

    >> Clear one signal: RATS ! VDD;

    >> Clear all signal: RATS ! *;

    >> Display one signal: RATS VDD;

    >> Display all signal: RATS *;

    >>

    >>

    I am using eagle 4.13 pro. After I have run rastnest I would like to

    continue my manual routing. This is easier when the pour is not shown.

    As it is now the only way I know how to get the pour to not be shown is

    to change the outline of the pour. Tried the RATS ! *; command but the

    display flickers and all is as before. The ratsnested area is still shown.

    >

    Is there any way to do this?

    >

    Br,

    >

    Bertil Bäck

    >

    To disable/enable polygon pour when you do a ratsnest just do:

    SET POLYGON_RATSNEST OFF/ON

    You may also want to hide the airwires for that signal.

     

Reply
  • in reply to Former Member

    On 12.08.10 12:32 PM, Bertil Bäck wrote:

    On 12.2.2010 23:08, Christian Bohrer wrote:

    >> "John Bachman"<john.bachman@anatekcorp.com> a écrit dans le message de

    >> news: hl407t$ga9$1@cheetah.cadsoft.de...

    >>> What is the command to display only one signal? I thought that it was

    >>> RATSNEST VDD for instance but that does not work.

    >>

    >> Of course that works, but you have to clear all signals before.

    >>

    >> Clear one signal: RATS ! VDD;

    >> Clear all signal: RATS ! *;

    >> Display one signal: RATS VDD;

    >> Display all signal: RATS *;

    >>

    >>

    I am using eagle 4.13 pro. After I have run rastnest I would like to

    continue my manual routing. This is easier when the pour is not shown.

    As it is now the only way I know how to get the pour to not be shown is

    to change the outline of the pour. Tried the RATS ! *; command but the

    display flickers and all is as before. The ratsnested area is still shown.

    >

    Is there any way to do this?

    >

    Br,

    >

    Bertil Bäck

    >

    To disable/enable polygon pour when you do a ratsnest just do:

    SET POLYGON_RATSNEST OFF/ON

    You may also want to hide the airwires for that signal.

     

Children
No Data