EAGLE Training Seminars

James Morrison wrote:

Hello everyone,

 

We will be offering a few public courses over the next few months.  These

seminars are for those who are interested in using EAGLE for real,

professional design.  There is a lot of information over the course of the

day and these courses are aimed at those who have used EAGLE for a few

designs and are now ready to really optimize their use of the tool.

 

One of the dates (May 11) will be an online course for those who can't get

to Toronto easily or cost effectively.

 

More information at http://www.eaglecentral.ca/training.

 

Please note that for larger companies we will come to you to offer these

courses on your premises.   We can even customize the course to address

specific needs your design team may be facing.  Contact us for more

details.

 

James, you might want to specify at each line item whether the prices

are Canadian or US Dollar.

And tell them to bring warm clothes ...

--

Regards, Joerg

http://www.analogconsultants.com/

Joerg <invalid@invalid.invalid> wrote:

James Morrison wrote:

>> Hello everyone,

>>

>> We will be offering a few public courses over the next few months.  These

>> seminars are for those who are interested in using EAGLE for real,

>> professional design.  There is a lot of information over the course of the

>> day and these courses are aimed at those who have used EAGLE for a few

>> designs and are now ready to really optimize their use of the tool.

>>

>> One of the dates (May 11) will be an online course for those who can't get

>> to Toronto easily or cost effectively.

>>

>> More information at http://www.eaglecentral.ca/training.

>>

>> Please note that for larger companies we will come to you to offer these

>> courses on your premises.   We can even customize the course to address

>> specific needs your design team may be facing.  Contact us for more

>> details.

>>

 

James, you might want to specify at each line item whether the prices

are Canadian or US Dollar.

 

And tell them to bring warm clothes ...

And put a space between URLs and period Clicking the link includes the

dot.

Joerg wrote on Fri, 18 February 2011 11:15

James Morrison wrote:

 

<snip>

 

More information at http://www.eaglecentral.ca/training

 

Please note that for larger companies we will come to you to offer

these

courses on your premises.   We can even customize the course to

address

specific needs your design team may be facing.  Contact us for

more

details.

 

 

James, you might want to specify at each line item whether the prices

are Canadian or US Dollar.

Good point Joerg, thanks.  I'm pretty sure that was there before but it's

not now.  Anyways, I specified $CDN.  These days it's pretty much 1:1 so it

doesn't matter much.

Quote:

And tell them to bring warm clothes ...

Good point, I suppose that is all in the eye of the beholder.  Locals may

be in shorts by then but it still may be just above freezing

The class is held about 1 minute from the Toronto (YYZ) airport so if

anyone is flying in they shouldn't have to be exposed to too much weather.

--

James Morrison  ~~~  Stratford Digital

Specializing in CadSoft EAGLE

• Online Sales to North America

• Electronic Design Services

• EAGLE Enterprise Toolkit

--

Web access to CadSoft support forums at www.eaglecentral.ca.  Where the CadSoft EAGLE community meets.

Morten Leikvoll wrote on Fri, 18 February 2011 12:33

>>

>> More information at http://www.eaglecentral.ca/training

>>

And put a space between URLs and period Clicking the link includes

the

dot.

Thanks for catching that Morten.  I went and modified the links on the web

page because I can, unfortunately it won't propagate through to NNTP.  But

this will

It was just a typo on my end.

James.

--

James Morrison  ~~~  Stratford Digital

Specializing in CadSoft EAGLE

• Online Sales to North America

• Electronic Design Services

• EAGLE Enterprise Toolkit

--

Web access to CadSoft support forums at www.eaglecentral.ca.  Where the CadSoft EAGLE community meets.

James Morrison wrote:

Joerg wrote on Fri, 18 February 2011 11:15

Quote:

>> And tell them to bring warm clothes ...

 

Good point, I suppose that is all in the eye of the beholder.  Locals may

be in shorts by then but it still may be just above freezing

 

Like the Alaska Airlines pilot? "Folks, please remain seated until the

aircraft has come to a full stop and the seat belt sign is turned off.

The temperature in Anchorage is 33F, looks like a real scorcher today."

For the guys in the metric world: 33F is just above freezing.

--

Regards, Joerg

http://www.analogconsultants.com/

James Morrison wrote on Tue, 15 February 2011 01:01

Hello everyone,

 

We will be offering a few public courses over the next few months.

These seminars are for those who are interested in using EAGLE for real,

professional design.  There is a lot of information over the course of

the day and these courses are aimed at those who have used EAGLE for a

few designs and are now ready to really optimize their use of the tool.

 

<snip>

We've set the Toronto dates to be April 22 and June 10, 2011.  If you

register early you receive a 10% discount (fast approaching for April 22

date).

The online course will be offered on May 11th.

I'm also happy to announce the possibility of offering our course in

Vancouver, Canada.  We are currently looking for those interested in

attending

EAG110 on May 24th or 27th (if EAG310 below doesn't run)

EAG310 on May 25-27th

But we need extra time to organise these so we're asking anyone interested

to contact us immediately.  The sooner we get the minimum number of

participants the sooner we can set it in stone and let everyone know it's a

go.

If you're interested in any of these times please contact us directly to

confirm.  As usual, all the latest info at

http://www.eaglecentral.ca/services/training/

James.

--

James Morrison  ~~~  Stratford Digital

Specializing in CadSoft EAGLE

• Online Sales to North America

• Electronic Design Services

• EAGLE Enterprise Toolkit

--

Web access to CadSoft support forums at www.eaglecentral.ca.  Where the CadSoft EAGLE community meets.