Actions
Forum Thread Details
  • Replies 2 replies
  • Subscribers 178 subscribers
  • Views 296 views
  • Users 0 members are here
Related

Open windows on layout

pejvaak

hi guys

 

I know that we can open holes on the layout in eagle but I need to open some square windows and I was wondering if it can be done.

 

Regards,

Pejwaak

Parents

  • Am 10.01.2012 13:22, schrieb Pejwaak Salimi:

    I know that we can open holes on the layout in eagle but I need to open some square windows and I was wondering if it can be done.

     

    Draw some wires

      - with width=0 (not necessary, but useful)

      - in layer 'Dimension' (obligatory).

    This is the layer where the outline information is stored. You can use

    all line drawing tools here (wire, circle, arc) to create arbitrary shapes.

     

    Andreas Weidner

     

     

  • in reply to Former Member

    Andreas Weidner <andreas.weidner@aei.mpg.de> wrote:

    Am 10.01.2012 13:22, schrieb Pejwaak Salimi:

    >> I know that we can open holes on the layout in eagle but I need to open

    >> some square windows and I was wondering if it can be done.

     

    Draw some wires

    - with width=0 (not necessary, but useful)

    - in layer 'Dimension' (obligatory).

    This is the layer where the outline information is stored. You can use

    all line drawing tools here (wire, circle, arc) to create arbitrary shapes.

     

    Andreas Weidner

     

    Note that sharp corners are expensive, if possible at all, to manufacture.

    Use wire widt of 2.6mm or manuf recommendation for millings. You may open

    the corners a bit more if needed.

     

Reply
  • in reply to Former Member

    Andreas Weidner <andreas.weidner@aei.mpg.de> wrote:

    Am 10.01.2012 13:22, schrieb Pejwaak Salimi:

    >> I know that we can open holes on the layout in eagle but I need to open

    >> some square windows and I was wondering if it can be done.

     

    Draw some wires

    - with width=0 (not necessary, but useful)

    - in layer 'Dimension' (obligatory).

    This is the layer where the outline information is stored. You can use

    all line drawing tools here (wire, circle, arc) to create arbitrary shapes.

     

    Andreas Weidner

     

    Note that sharp corners are expensive, if possible at all, to manufacture.

    Use wire widt of 2.6mm or manuf recommendation for millings. You may open

    the corners a bit more if needed.

     

Children
No Data