I used PCI-E_164_EDGE device from con-pci_express lib and it is
generating DRC errors. Does anyone have an alternative library or is
there another version without errors. This is a lot of work to try to
meet the spec for PCI-e for the mechanicals, any advice would be
appreciated. Thank you.
 |
Robert Lewis schrieb:
On Thu, 26 Feb 2009 12:00:43 +0100, Joern Paschedag
<jpaschedag@t-online.de> wrote:
Robert Lewis schrieb:
I used PCI-E_164_EDGE device from con-pci_express lib and it is
generating DRC errors. Does anyone have an alternative library or is
there another version without errors. This is a lot of work to try to
meet the spec for PCI-e for the mechanicals, any advice would be
appreciated. Thank you.
Would be nice if you specify what kind of error. If it is dimension or
clearance you have to adjust your design rules.
Yes, of course... my error and appology.
The errors are listed as layer 1 & 16, Type Dimension, there are 4
errors on each layer. Each relates to the closeness of the copper
finger (trace) next to the dimension edge.
I attached a screen capture but I do not know if that is acceptable
for the forum.
Thank you.
Ah, a picture tells more than 1000 words 
Yes it's the distance between the copper finger and the edge. So you can
either accept those 4 errors, or you change the copper/dimension value
of the DRC in the "Distance" Tab down to about 4 mils.
--
Gruß / regards
Jörn
