Actions
Forum Thread Details
  • Replies 1 reply
  • Subscribers 145 subscribers
  • Views 81 views
  • Users 0 members are here
Related

No solder stop or printing on traces

autodeskguest

In a script I create some contact lines on a board.

 

  1. Now draw some contact layers on layer 1;

  2. The width is 3 mm;

Change Layer 1;

Circle 3 (0 0) (10 0);

Circle 3 (0 0) (14 0);

Circle 3 (0 0) (18 0);

Circle 3 (0 0) (22 0);

Circle 3 (0 0) (26 0);

Circle 3 (0 0) (30 0);

 

  1. Now draw some contact layers on layer 16;

  2. The width is 3 mm;

Change Layer 16;

Circle 3 (0 0) (10 0);

Circle 3 (0 0) (14 0);

Circle 3 (0 0) (18 0);

Circle 3 (0 0) (22 0);

Circle 3 (0 0) (26 0);

Circle 3 (0 0) (30 0);

 

But as the nam already says the contact lines may not be covered by any

solder mask or printing. How should I do that in a script?

 

Harry

 

 

  •  

    "Harry H. Arends" <info@time-tech.eu> a écrit dans le message de news:

    gved7r$gct$1@cheetah.cadsoft.de...

    In a script I create some contact lines on a board.

     

    1. Now draw some contact layers on layer 1;

    2. The width is 3 mm;

    Change Layer 1;

    Circle 3 (0 0) (10 0);

    Circle 3 (0 0) (14 0);

    Circle 3 (0 0) (18 0);

    Circle 3 (0 0) (22 0);

    Circle 3 (0 0) (26 0);

    Circle 3 (0 0) (30 0);

     

    1. Now draw some contact layers on layer 16;

    2. The width is 3 mm;

    Change Layer 16;

    Circle 3 (0 0) (10 0);

    Circle 3 (0 0) (14 0);

    Circle 3 (0 0) (18 0);

    Circle 3 (0 0) (22 0);

    Circle 3 (0 0) (26 0);

    Circle 3 (0 0) (30 0);

     

    But as the nam already says the contact lines may not be covered by any

    solder mask or printing. How should I do that in a script?

    Harry

     

    For the solder mask, run the same script on layer 29 and 30

    with a width of 3.2 mm or more.