Actions
Forum Thread Details
  • Replies 3 replies
  • Subscribers 188 subscribers
  • Views 1330 views
  • Users 0 members are here
Related

Can't find a missing airwire which I have   to route

e14 Contributor

Subject sort of explains things. I've manually routed all the air wires

which have to be routed but the ratsnest reports that I've missed one. I

can't find it anywhere. I've zoomed in and gone over the diagram. I've

removed the top and bottom layers from the visible set, but I still can't

find the air wire that eagle thinks I have to route. Is there any way that

I can find the airwire I'm missing?

--

Web access to CadSoft support forums at www.eaglecentral.ca.  Where the CadSoft EAGLE community meets.

 

  • in reply to Richard_H

    Genius that got it so easy. Thanks a million for the tips

    --

    Web access to CadSoft support forums at www.eaglecentral.ca.  Where the CadSoft EAGLE community meets.

     

  • Am 02.11.2011 18:46, schrieb Arigead:

    Subject sort of explains things. I've manually routed all the air wires

    which have to be routed but the ratsnest reports that I've missed one. I

    can't find it anywhere. I've zoomed in and gone over the diagram. I've

    removed the top and bottom layers from the visible set, but I still can't

    find the air wire that eagle thinks I have to route. Is there any way that

    I can find the airwire I'm missing?

     

    1. Set the Catch factor in Options/Set/Misc to 0

    2. Use ROUTE and click into the drawing

     

    The airwire junps onto the mouse cursor.

     

     

    --

    Mit freundlichen Gruessen / Best regards

    Richard Hammerl

      CadSoft Support -- hotline@cadsoft.de

      FAQ: http://www.cadsoft.de/training/faq/

     

     

  • Am 02.11.2011 18:46, schrieb Arigead:

    Is there any way that

    I can find the airwire I'm missing?

     

    Unzip the attached files, put them in your ULP folder, open your project

    and type 'run check'. The program checks schematics and board for

    often-found problems that ERC or DRC might NOT display: One test is the

    one for airwires, and you can zoom in on them. Useful for EAGLE 5.11 - I

    don't know whether older versions work properly.

     

    Note: The 'include' files are COMPLETE overkill and contain LOTS of

    things that are NOT AT ALL needed for the airwire check. But one or two

    of their functions ARE necessary, and therefore, the 'check' ULP cannot

    do without them.

     

    Andreas Weidner