Actions
Forum Thread Details
  • Replies 3 replies
  • Subscribers 188 subscribers
  • Views 312 views
  • Users 0 members are here
Related

middle mouse pan win7-64

e14 Contributor

hi all,

 

I've got a new workstation recently and the powers that be decided

that it be win7-64.

 

Eagle (5.11.2) works fine so far, but middle mouse pan doesn't work

any longer.

 

I've allready checked that there is no mouse driver meddling with the

middle mouse button.

And googling didn't help either.

 

Anyone out there running eagle (5.11.2) on win7-64 can help or confirm

the problem?

--

 

Lorenz

 

  • in reply to e14 Contributor

    Lorenz wrote:

    >Andreas Weidner wrote:

    >>Am 24.11.2011 10:31, schrieb Lorenz:

    >>> Anyone out there running eagle (5.11.2) on win7-64 can help or confirm

    >>> the problem?

    >>

    >>No, but I make life miserable for you by UNconfirming it with at least

    >>two PCs. Using EAGLE 5.11.2 on the computer I'm currently sitting at

    >>with 64-bit Windows 7 works fine since several months.

    >a well ... 8-(

    >I'll fiddle around some more when I find some time, perhapse it has

    >something to do with the KVM switch I'm using to switch between my old

    >XP workstation (where middle mouse pan works ok) and the new Win7-64

    >...

    >

    >I'll report back when I find the culprit - may take some time though.

     

    found it 8-)

     

    I'm running KatMouse and when setting it up on my new workstation

    forgot to configure it to leave the wheel button alone.

    --

     

    Lorenz

     

  • in reply to e14 Contributor

    Andreas Weidner wrote:

    >Am 24.11.2011 10:31, schrieb Lorenz:

    >> Anyone out there running eagle (5.11.2) on win7-64 can help or confirm

    >> the problem?

    >No, but I make life miserable for you by UNconfirming it with at least

    >two PCs. Using EAGLE 5.11.2 on the computer I'm currently sitting at

    >with 64-bit Windows 7 works fine since several months.

     

    a well ... 8-(

     

    I'll fiddle around some more when I find some time, perhapse it has

    something to do with the KVM switch I'm using to switch between my old

    XP workstation (where middle mouse pan works ok) and the new Win7-64

    ...

     

     

    I'll report back when I find the culprit - may take some time though.

    --

     

    Lorenz

     

  • Am 24.11.2011 10:31, schrieb Lorenz:

    Anyone out there running eagle (5.11.2) on win7-64 can help or confirm

    the problem?

     

    No, but I make life miserable for you by UNconfirming it with at least

    two PCs. Using EAGLE 5.11.2 on the computer I'm currently sitting at

    with 64-bit Windows 7 works fine since several months. At least with the

    following hardware:

      - A Fujitsu motherboard with

      - Intel i5 @ 3.2GHz and

      - an OLD Logitech cordless mouse (with PS/2 connector).

     

    The same works properly for my other PC, which has

      - also a Fujitsu motherboard,

      - (no idea about the processor) and

      - an old Dell mouse with PS/2 connector (via a KVM switch).

     

    Mind that transparency and stuff has been completely disabled - I'm

    using Windows' classic mode.

     

    Perhaps CadSoft can dig into your problem if you sent them information

    about your hardware and stuff - at least it doesn't appear to be a

    common problem...

     

    Andreas Weidner