Actions
Forum Thread Details
  • Replies 126 replies
  • Subscribers 191 subscribers
  • Views 7931 views
  • Users 0 members are here
Related

Have a question about CadSoft EAGLE?  Ask our Expert, Jorge!

Jorge_Garcia

If you have questions about CadSoft EAGLE, please click here to post your question!


If you'd rather browse other member's questions you can read the CadSoft EAGLE Forums for past questions and answers. Enjoy!

 

richardhammerl.png

 

Jorge Garcia

I'm a young engineer with extensive experience working on EAGLE. My interests include Power Supply design and LED solid state lighting, and I'm always impressed by a well designed PCB.

 

 

If not already, you'll need to

image or image

 


to ask your question.

Otherwise, click reply below.

Parents

  • I have generated output files for fab house but all layers are mis aligned from IPC? Can you please help me to figur out the issue.

  • in reply to Former Member

    On 09/06/2013 05:45 AM, Hafiz Muhammad Mujahid wrote:

    I have generated output files for fab house but all layers are mis

    aligned from IPC? Can you please help me to figur out the issue.

     

    Refer to my post in this newsgroup on 26-Mar-2013 titled "Re: Gerber

    files and Pick and place file".

     

    This will identify the problem and show you how to fix it.

     

    HTH,

        - Chuck

     

  • in reply to dukepro

    On 9/6/2013 8:14 AM, Chuck Huber wrote:

    On 09/06/2013 05:45 AM, Hafiz Muhammad Mujahid wrote:

    I have generated output files for fab house but all layers are mis

    aligned from IPC? Can you please help me to figur out the issue.

     

    Refer to my post in this newsgroup on 26-Mar-2013 titled "Re: Gerber

    files and Pick and place file".

     

    This will identify the problem and show you how to fix it.

     

    HTH,

         - Chuck

     

     

    Thanks Chuck,

     

    Additionally, it important to make sure that in a CAM job all of the

    tabs have the pos. coords check box in the same state. It doesn't matter

    if it's checked or unchecked as long as all of the tabs have it set the

    same way.

     

    Best Regards,

    Jorge Garcia

     

Reply
  • in reply to dukepro

    On 9/6/2013 8:14 AM, Chuck Huber wrote:

    On 09/06/2013 05:45 AM, Hafiz Muhammad Mujahid wrote:

    I have generated output files for fab house but all layers are mis

    aligned from IPC? Can you please help me to figur out the issue.

     

    Refer to my post in this newsgroup on 26-Mar-2013 titled "Re: Gerber

    files and Pick and place file".

     

    This will identify the problem and show you how to fix it.

     

    HTH,

         - Chuck

     

     

    Thanks Chuck,

     

    Additionally, it important to make sure that in a CAM job all of the

    tabs have the pos. coords check box in the same state. It doesn't matter

    if it's checked or unchecked as long as all of the tabs have it set the

    same way.

     

    Best Regards,

    Jorge Garcia

     

Children
  • in reply to autodeskguest

    On 09/10/2013 04:55 PM, Jorge Garcia wrote:

    On 9/6/2013 8:14 AM, Chuck Huber wrote:

    On 09/06/2013 05:45 AM, Hafiz Muhammad Mujahid wrote:

    I have generated output files for fab house but all layers are mis

    aligned from IPC? Can you please help me to figur out the issue.

     

    Refer to my post in this newsgroup on 26-Mar-2013 titled "Re: Gerber

    files and Pick and place file".

     

    This will identify the problem and show you how to fix it.

     

    HTH,

         - Chuck

     

     

    Thanks Chuck,

     

    Additionally, it important to make sure that in a CAM job all of the

    tabs have the pos. coords check box in the same state. It doesn't

    matter if it's checked or unchecked as long as all of the tabs have it

    set the same way.

     

    Jorge,

     

    Wouldn't it make sense, then, to make the pos. coords. check box a

    property of the job and not each section?

     

    Maybe it's time to move away from the .ini format to an XML format for

    .cam files.  While the dev's are at it, they can break out combined

    properties, such as the Flags value, into individual boolean properties.

     

    Perhaps this is better suited for the suggest forum.

     

        - Chuck