Creating a Module?

Am 18.08.2015 um 17:31 schrieb Oppie:

I am considering making up a library part to support a purchased module.

The module has two large connectors (100 pins and 120 pins) on it that

connect to the motherboard.

 

I have the library for the connectors themselves already and wanted to

place these onto a device so I can ensure the orientation/spacing remain

correct as I position them on the larger assembly.

 

So far, I see no way to import the connector library parts to this

module. Am I missing something?

This is Eagle 5.1.  Thank-You in advance for any replies.

No answer to your question.... but

upgrade to ver. 5.12, cost you nothing and is more advanced 

--

Mit freundlichen Grüßen / With best regards

Joern Paschedag

Am 18.08.2015 um 17:31 schrieb Oppie:

I am considering making up a library part to support a purchased module.

The module has two large connectors (100 pins and 120 pins) on it that

connect to the motherboard.

 

I have the library for the connectors themselves already and wanted to

place these onto a device so I can ensure the orientation/spacing remain

correct as I position them on the larger assembly.

 

So far, I see no way to import the connector library parts to this

module. Am I missing something?

This is Eagle 5.1.  Thank-You in advance for any replies.

No answer to your question.... but

upgrade to ver. 5.12, cost you nothing and is more advanced 

--

Mit freundlichen Grüßen / With best regards

Joern Paschedag

"Joern Paschedag" <jpaschedag@t-online.de> wrote in message

news:mr1ckg$6f5$1@baboon.cadsoft.de...

Am 18.08.2015 um 17:31 schrieb Oppie:

I am considering making up a library part to support a purchased module.

The module has two large connectors (100 pins and 120 pins) on it that

connect to the motherboard.

 

I have the library for the connectors themselves already and wanted to

place these onto a device so I can ensure the orientation/spacing remain

correct as I position them on the larger assembly.

 

So far, I see no way to import the connector library parts to this

module. Am I missing something?

This is Eagle 5.1.  Thank-You in advance for any replies.

 

No answer to your question.... but

upgrade to ver. 5.12, cost you nothing and is more advanced 

 

I am actually at 5.11 which is working well for me. (I left out a 1 in my

message).

Wound up creating a .brd and .sch of my "module". Is there some way now I

can move this to a library?

"Joern Paschedag" <jpaschedag@t-online.de> wrote in message

news:mr1ckg$6f5$1@baboon.cadsoft.de...

Am 18.08.2015 um 17:31 schrieb Oppie:

I am considering making up a library part to support a purchased module.

The module has two large connectors (100 pins and 120 pins) on it that

connect to the motherboard.

 

I have the library for the connectors themselves already and wanted to

place these onto a device so I can ensure the orientation/spacing remain

correct as I position them on the larger assembly.

 

So far, I see no way to import the connector library parts to this

module. Am I missing something?

This is Eagle 5.1.  Thank-You in advance for any replies.

 

No answer to your question.... but

upgrade to ver. 5.12, cost you nothing and is more advanced 

 

I had mis-typed the version. I actually have 5.11.

Wound up creating a .sch and .brd. Is there some way I can move these to a

library now?

 

Wound up creating a .sch and .brd. Is there some way I can move these to

a library now?

Hi Oppie,

Unfortunately, we don't have full hierarchy yet. We have schematic

hierarchy but we are still missing the board side.

Let me know if there's anything else I can do for you.

Best Regards,

Jorge Garcia