Instead of counting the grid lines, can I just mark 2 points and the
separation will be shown?
Thank you!
Bert Menkveld wrote:
Murata wrote:
Instead of counting the grid lines, can I just mark 2 points and theseparation will be shown?
Use "Mark" to place a reference marker. Eagle will then display the distance to that Mark. --Bert Menkveld
Use "Mark" to place a reference marker. Eagle will then display the
distance to that Mark.
--
Bert Menkveld
Just be aware that the distance will be in multiples of the grid. So if
your grid is 10 mils, then a distance of 15 mils will either be 10 or 20
mils.
-Dave Pollum
