Actions
Forum Thread Details
  • Replies 1 reply
  • Subscribers 178 subscribers
  • Views 152 views
  • Users 0 members are here
Related

Add 4 Layer in 5.0

autodeskguest

I'm using V5.0 and started a board as a 2 layer then went to add layer 2 &

15 as I would have done in 4.0 and only have a layer choice of 100. What do

I need to do to add more signal layers? I only use board layout not the

schematic or autorouter.

Thanks Doug W

 

 

 

Parents

  • EFI schrieb:

    I'm using V5.0 and started a board as a 2 layer then went to add layer 2 &

    15 as I would have done in 4.0 and only have a layer choice of 100. What do

    I need to do to add more signal layers? I only use board layout not the

    schematic or autorouter.

    Thanks Doug W

     

     

     

    Simply change the layer setup in the Design Rules. For a four layer

    board it could look like this:

     

      (12*1516)

     

    In case the board file was started in a Light Edition, you have to

    define the inner layers first:

     

      LAYER 2 Route2;

      LAYER 15 Route15;

     

     

    --

    Mit freundlichen Gruessen / Best regards

    Richard Hammerl

      CadSoft Support -- hotline@cadsoft.de

      FAQ: http://www.cadsoft.de/faq.htm

     

Reply

  • EFI schrieb:

    I'm using V5.0 and started a board as a 2 layer then went to add layer 2 &

    15 as I would have done in 4.0 and only have a layer choice of 100. What do

    I need to do to add more signal layers? I only use board layout not the

    schematic or autorouter.

    Thanks Doug W

     

     

     

    Simply change the layer setup in the Design Rules. For a four layer

    board it could look like this:

     

      (12*1516)

     

    In case the board file was started in a Light Edition, you have to

    define the inner layers first:

     

      LAYER 2 Route2;

      LAYER 15 Route15;

     

     

    --

    Mit freundlichen Gruessen / Best regards

    Richard Hammerl

      CadSoft Support -- hotline@cadsoft.de

      FAQ: http://www.cadsoft.de/faq.htm

     

Children
No Data