I have migrate from EAGLE V4.16r2 to V5.0.0 and V5.1.0.
On board on V4.16r2 if I do DISPLAY layer and I switch OFF layers 21 22 23
24 25 26 I see the layer TOP BOTTOM VIAS PAD UNROUTED DIMENSION.
If I do the same on V5.0.0 or on V5.1.0, I see some parts of shape for CMS,
RESISTOR, PIN CONNECTOR.
If I switch OFF the layer 51 tDocu at this time I see the same at V4.16r2.
In V5.0.0 and V5.1.0 is there relation betwen this layer???? I think not !
Have you a solution.?
Regards
Hello STVENANT !:
....
In V5.0.0 and V5.1.0 is there relation betwen this layer???? I think not !
You are right 
!
Have you a solution.?
Yes !
DISPLAY command:
- The DISPLAY command no longer automatically turns related layers on or off
when used with the t/bPlace or Symbols layer.
The parameter
Option.DisplayRelatedLayers = "0"
to the eaglerc.usr file is now obsolete.
- The DISPLAY command now supports "aliases" for parameter settings (see
"Aliases for command parameters").
- The DISPLAY command has a new option "Last", which restores the settings
as they were before the previous DISPLAY command.
its from update info ..... so to switch some layers on/off now you need
to assign the command to a function key. I have :
Brd.Key.C+F6 = "dis 21 22 23 24"
.....
Brd.Key.S+F6 = "dis -21 -22 -23 -24 -25 -26 -27 -28"
It works, maybe the old method was sometimes more comfortable...
HTH
--
Grzegorz Zalot
complex ltd.
office tel/fax : +48 32 2505840
mobil : +48 501 301515
Hello Grzegorz Zalot
I forgot, my PC is under Windows XP pro SP3.
Thanks for your answer.
You are RIGHT the old method was more confortable.
regards.
"Grzegorz Zalot" <complex@alpha.pl> a écrit dans le message de news:
Hello STVENANT !:
....
In V5.0.0 and V5.1.0 is there relation betwen this layer???? I think not
!
You are right
!
Have you a solution.?
Yes
DISPLAY command:
- The DISPLAY command no longer automatically turns related layers on
or off
when used with the t/bPlace or Symbols layer.
The parameter
Option.DisplayRelatedLayers = "0"
to the eaglerc.usr file is now obsolete.
- The DISPLAY command now supports "aliases" for parameter settings
(see
"Aliases for command parameters").
- The DISPLAY command has a new option "Last", which restores the
settings
as they were before the previous DISPLAY command.
its from update info ..... so to switch some layers on/off now you need to
assign the command to a function key. I have :
Brd.Key.C+F6 = "dis 21 22 23 24"
.....
Brd.Key.S+F6 = "dis -21 -22 -23 -24 -25 -26 -27 -28"
It works, maybe the old method was sometimes more comfortable...
HTH
--
Grzegorz Zalot
complex ltd.
office tel/fax : +48 32 2505840
mobil : +48 501 301515
